Recent content by tekkiesteve

What is the out put of the original boiler? Is 9Kw big enough to heat your house?

Fein multimaster. http://www.feinmultimaster.co.uk/

does it fire when set for hot water?

http://www.uswitch.com/ConsumerGuide/Energy/ScottishPower-OnlineEnergyPriceFall-77671/PlanInformation/Overview.aspx?ReturnURL=http%3a%2f%2fwww.uswitch.com%2fEnergy%2fE_Output.aspx%3fSessionID%3d%252fXp47KFat5GC%252fJKnMndROLHaeF%252bXJJoa%26ref%3dscp%7eEnergy%7eindex&ContinueURL=http%3a%2f%2fwww...

Scottish power tarrif 7.353p per kwh. 10 kwh boiler running at full with no allowance for temp modulation = 73.5p per hour.

http://www.mirashowers.com/onlinecatalog/shower_features.jsp?item=341316&prod_num=Magna&cat=Mixer+Showers

There might still be hope for the mining industry!

The way oil/gas price is rising pretty soon electric will be the norm.

Nuclear?

How is a sealed, inhibited system going to be affected by hard water?

I have fitted the Trianco aztec boilers and my personal opinion is that they are a good bit of kit virtually 100% efficient, the bigger units (multi-element) are fully modulating and maintenance free! when was the last time you bought a kettle because it had packed up? You obviously need to...

What about an air source heat pump? Check out Trianco's new 12KW ASHP a lot less hassle to fit than a GSHP. Steve

If you used hep20 pipe and fittings i have been reliably informed by an ex technician from hepworth the pipe and fittings will withstand 70 bar!!! thats the typical burst pressure they achieved at the factory. Steve

http://www.hmjames.co.uk/index.htm

I am going to relocate my oil tank and run a new oil line, could someone please advise on the laying of the oil line with regard to depth of trench and what sort of protection is required i.e. trunking,i will be using 10mm plastic coated copper pipe. Thanks in advance. Steve