Thanks for the reply
If i cut out a section of say 18", how do you stop the rest of it coming down on your head :?:
Also, do the tea and biscuits have to be in that order :lol:
Hello all
Could anyone tell me the best method to connect into a cast soil stack?
I'm trying to convert a garage into a granny flat and need to join the new toilet, basin and shower waste pipes into it.
I don't want to replace it all because it passes through the flat roof of the garage and i...
Is it worth contacting mira to check on replacement parts?
There is a low pressure light on the shower which is not lit, so i thought the pressure must be ok?
Also would the upgrade to 10.5kw make much difference.
Thanks for the advice
I guess mira sport are'nt designed to have the heating element replaced then?
If its got to go, any recomendations for a replacement? Something with a bit more pressure?
Cheers
I've got a 6 year old Mira sport 7.5kw that can only lukewarm at best.
Even when its on its on the hottest setting its still not good enough. The pressure seems to of dropped off even though it was never great.
Is it a case of replacing the whole thing or do mira supply parts to correct these...
Thanks
Does that mean if i get the right pump i should be ok to fit it in the loft?
Are my local DIY shops or plumbers merchants likely to have these pumps.
Thanks for replying, i'm just a bit stuck.
I have an existing gravity fed shower in the en-suite and i'm fitting another shower in the main bathroom above the bath.
I was hoping to use existing shower hot and cold feeds in the loft, and feed them into a pump. From the pump i would T-off to each shower.
Is this possible????
I think...
when you say "shower diverter section", what is this.
The pipework T's of the hot and cold in the airing cupboard and then into the pump. Then the pipes head into the loft and along to the en-suite before dropping down behind the shower.
What should i be looking for?
Does the delay in...
Thanks for the replies
I've changed the pump and the flexi connectors. Where would i find the check valves and strainers???
I have rubbed the rubber bits on the shower heads and all seems fine. Could the pipework be blocked with limescale???
The instructions state the there should be a...
Hi all
4 years ago i had a new shower fitted in my en-suite, it has a pump under the bath in the main bathroom. The shower itself has a fixed shower head, body jets and a flexible hose. When it was first fitted i could run all 3 features at once, now it 1 at a time and the pressure is not...