Recent content by towan

Depends what timer you have fitted, have you got the ideal rf programable room stat fitted?

To either Pre heat the hot water in the heat exchanger or not! With it on, the boiler will fire occasionally to keep the heat exchanger at a certain temp, and give you hot water quicker. With it off, the boiler may have to fire from cold, to give you hot water, which can take some time.

Sorry read wrong! Normally you have the uncontrolled radiator and thermostat in the same room, take it there was no room on the landing for a radiator? Is it a wired thermostat? You could move it into the bedroom, or put a trv on the radiator in the bedroom. But then you need to make sure...

Fit a trv to the rad in the bathroom, then set to the temp required. Sorted and easy. Dan

Boiler

have you got a model number??

Fitted over 100+ logics over the last couple of years and found them very reliable. Customers love them due to size and how quiet they are, plus the boiler talks to you in plain English so you know what going on.

Is boiler suitable for 5 rads (TOTAL KW is 14) but need 4 extra rads (TOTAL KW 11) AND a bathroom used by 6 adults and kids too. Just reread your post. 5 rads total 14kw?! are you sure? They must all be very large radiatirs.

Nothing wrong with the Logic, fitted many. Just be aware, they are all 24kw to heating. The 30 kw and 35kw are for hot water only.

As have already said Logic all the way. Much better than the Junior.

Nothing wrong with this boiler at all. Been fitting them since they first come out with no issues at all. The previous range were not very good at all, but this one is looking good.