- Joined
- 15 Aug 2015
- Messages
- 41
- Reaction score
- 0
- Country
Rewiring a Texecom PIR. Easy surely?
- Thread starter Farleigh
- Start date
Sponsored Links
Looks like the old pirs have used a power return method , use red and black for power , then use the other two cores in eol mode, wire to the first tamper terminal on your new pir and last alarm terminal , set the pir via the jumpers to 4.7 alarm 2.2 tamper. So you will have red in 12v black in 0v White in tamper and yellow in alarm.
Keep it simple.
When replacing the panel and pir's it doesn't matter what the old wiring was so much, just that when you reuse the good wires that its wired correctly for the new equipment at both ends.
When replacing the panel and pir's it doesn't matter what the old wiring was so much, just that when you reuse the good wires that its wired correctly for the new equipment at both ends.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
