- Joined
- 11 Jan 2004
- Messages
- 42,733
- Reaction score
- 2,633
- Country
It looks like it MAY fit. But whether it is meant to go in there, or whether it will be electrically and mechanically secure, I can't say.
Replacement ballast for a t9 32w (circular tube) kitchen light
- Thread starter Rathilion
- Start date
Sponsored Links
Looks like it is an IDC … Insulation Displacement Connection terminal.
http://www.tridonic.com/ae/download/technical/Disconnect_wires_at_different_terminal_types.pdf
http://www.tridonic.com/com/en/download/data_sheets/Magnetic_Chokes_2012_EN.pdf
http://www.tridonic.com/ae/download/technical/Disconnect_wires_at_different_terminal_types.pdf
http://www.tridonic.com/com/en/download/data_sheets/Magnetic_Chokes_2012_EN.pdf
Well, clearly they are made for it, but I'd be very uncomfortable with the idea of using IDC connections for 230V.
Why?
Sponsored Links
The top push down terminals are used in some fittings, but again they are for 1.0 mm solid cable, NOT stranded.
I would be llooking at replacing that wire with high temp 1.0 mm solid lighting cable, last resort would be crimping a solid cable to the existing, but thats last resort if the wires cant be removed.
Is this light worth all the effort.
I would be llooking at replacing that wire with high temp 1.0 mm solid lighting cable, last resort would be crimping a solid cable to the existing, but thats last resort if the wires cant be removed.
Is this light worth all the effort.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
