Search results

Is Worcester Bosch really that bad?

I am in the process of geting my boiler upgraded. Require approx 40KW. Not sure the best make - thoughts are a Grants or a Worcester Bosch - which is best? Thanks

BigBurner, thanks you confirm my thoughts, only one of Thermal stores (Flowmax) has a facility for a immersion so I could use it alyhough it would take some time to heat up. I assume the advantage of use the immersion is that I can use any Shower unit, as I would ideally not like to be...

Yes, I do have main water pressure. I have 2 off heat stores which are heated by my Rayburn and or back boilers which are connected to log burning / multifuel stoves.

I am upgrading an en-suite bathroom and would like to have the flexibility of an electric shower (heating boiler breaks etc), however, don't like the looks of an electric shower. Can I sucessfully use an Electric inline heater to power one off shower, I am proposing to use a 11 or 12 KW unit...

I have recently moved into a new (to me anyway) property with a Mera 2000 consumer unit (main switch to the right). It is currently not split i.e. not RCD. I would like to upgrade it, however don't realy want to replace it. What are my options, it still has 4 spare ways for future expansion. I...

I can't remember how many times exactly, however it was a significan t no. How may times would you recommend?

i have got some Fernox LS-X external leak I have had some sucess with it, however, I suppose I will just have to add more.

I did wrap the PTFE tape the correct way, i.e. not causing it to unwrapp.

It is leaking on the Mi threaded part, the compression fitting (olive) is Ok

It is the supply and 2 off blank fittings that are leaking, the immersion and the outlet are OK. The leak is only a slight weep and only when under the addiotiona pressure of the hot water tank head, the cylinder on its own doesn't leak if you isolate the supply at the bottom of the cylinder.

I have installed new hot water cylinder "direct" used only with an immersion, not connected to any boiler, however, I have a slight weep from the fittings. No matter how much PTFE tape I use it still weeps. Can you use F4 LEAK SEALER on a direct hot water cylinder.