Search results

I have tried switching off, I unplugged it for a day or so, I also checked it wasn't a syphoning problem, Waste trap was also checked. No matter what the temperature is it makes no differance. A few weeks back it would do a 12 minute quick wash with no problem at all and other days it would just...

Approx 18 month old and nothing but problems with it, Sometimes it will fill with water then dumps the water and displays "End" cycle. Other times it will do a part cycle and again it dumps water and displays "End" cycle. I tried to capture this on video many times but then it decides to do a...

Caps and rectifier diodes now replaced but no difference, still loud hum/buzz so where to go from here ?

I've managed to source a couple of Caps but will have to wait for post, I cant really test them myself so will replace also ordered IN5408 rectifier diodes, I just hope the amp hasn't blown, For the life of me I can't figure out whats happened.

Thanks for that reply, Having listened a little more it sounds like a loud hum with a purring kind of sound ? its quite loud. I'm unsure how I can check the capacitors without replacing them but they look fine, no bubbling or leaks that I can see but others have mentioned they can go faulty so...

I purchased this amp about 3 years ago, http://www.gear4music.com/Guitar-and-Bass/DISC-White-Horse-BP150-Bass-Guitar-Amplifier/8J5 It's never been gigged with in fact its had very little use at all apart from using it with headphones. Recently I moved home and to my surprise the Amp doesn't...

Go to security, Manuals, intruder alarms.

http://rikain.com/index.htm

A Rottweiler :)

I managed to download an engineers manual for it so problem fixed. NVM reset and now works perfect. Thanks again everyone. :)

Well after many attempts at trying to reset this alarm i have gave up with it :( , A chocolate teapot would be more more usefull. I cant find an engineers manual anywhere Its getting ripped out at the weekend. Anyone want it absolutely free ? then PM me and i'll post it to you , If not it...

Thanks for the replies, I will try and reset things later today but my problem is I have no access codes. Will try default code. From looking at the instructions you can only change codes if engineer allowed this ?. The instructions are a little confusing as to entering codes but will...

Heres the button my friend pressed to set the alarm off, Is there some kind of key or card for this ? Just to add the alarm was not armed went it went off. Heres the icon keypad (their are 2 of these ) So what do i do help please.

The council know nothing about the alarm, its been fitted by the previous tennant. The alarm sounded for 20 minutes (very loud too) then it started to beep but not as loud, so i thought by turning off the power it would stop :( I pressed every button on the icon keypad but nothing...

Help please, Im in the process of moving and the home (Council)i'm moving to has an alarm fitted. No instructions were left so i left the damn thing alone. Yesterday my friend pressed what he thought was a door intercom, The damn alarm went off i was in a panic and didnt know what to do. I...

Transformer is toast :D , Was smoking according to guy i got it from. It also has broken wires. Someone bypassed 3 fuses to test :shock: He gave me replacement and told me it was correct one, (RS type) is totally differant, And wrong voltage 0-12-0-12 volts Amp requires +52 and -52v I...

800ma mains input blown, transformer output +? -? volts both fuses from secondary output to bridge rectifier blown. As seen in diagram above Top left T2 T3

My mistake F1 800ma blown, power to transformer, F2 and F3 2amp from secondary winding going to bridge rectifier, So fault after rectifier ?

I havent tried to contact Award-session and they do have a website. http://www.award-session.com/ Circuit diagram SG 75 here http://www.award-session.com/award-session_manuals.html Power supply and transformer shown here, http://www.award-session.com/award-session_accessories.html Somewhat...