Search results

I have recently run cable from the back of my sky+ box, from the RF2 out, through the house to the TV in my bedroom and connected it using a magic eye so i can change channels from bedroom. all is working ok, but is there a product available so i do not have to keep swapping the tv aerial for...

thanks tamz. i have tried the water test and yes it does sit by the door and not run back into the tray. am worried if it is left as it is that over time water constantly sitting by the door and glass will have an adverse affect. i have used two levels to test the tray, as i am aware of...

the shower tray has an internal fall towards the waste. i have put my level across the front (where door is) and side (where screen is) and the corner needs lifting up. the tray is laid onto ply which is fixed to the floor boards. the floor naturaly runs out (30s house) and the fitter has not...

the plumber who was recommended by the bathroom supliers fitted the tray, someone else tiled, and the plumber is trying to now fit the enclosure. i am just the poor sod on the receiving end and wishing had done it my self !!!

the tray was supplied with the enclosure and is from Aqata. which I think are slightly better than other makers of shower enclosures ?! the plumber has made a comment that the tray is not fitted level?!?!?!?

hi, yes i have put two differant spirit levels on the tray and they both say the same, it is not level. the floor boards themself do not run level, but i can accept that in a 1930's house. the tray and the ply it sits on should be level irregardless of the floor. again the walls are...

thanks. i will take this up with the plumber. i will ask him to get the tray level. can this be done without taking it out i.e. can you pack the corner where it runs out in any way ? can the plumber say no at all ? at the end of the day i have not paid him for any of the work ?

the tray has got a built in slope towards the waste. the edge of the tray which the screen sits on is fairly flat and with the tray running out the water runs back towards the screen and door ?

instructions are with the plumber, looks like the tray was layed with mastick? is this acceptable?

thanks. the tray has been put onto ply on top of the floor boards, surely the ply and tray should have been levelled and not left to run with the level of the floor boards. if the shower screen sits flush to the tray then the door sits 5mm inside of the rubber strip at the top. to compensate...

the tiles where fitted by someone else and i am very happy with these, the tray runs out in the corner which is not attached to any tiles, so any difference near the tiles is concealed by grout/sealant. I am going to speak to plumber tomorrow, but how much can i expect the plumber to resolve...

is this the responsibility of the plumber and at his time and expense ?

to add further to this. the plumber has fitted the enclosure but due to it not being square has not sealed it any where yet. but everything els is done, i.e it has been tiled down to the tray, grouted and the tray sealed to the grout.

Thanks, The waste is the opposite side of the tray to the door so the water that sits on the top ledge of the tray runs back to the door. What do I do now ?

I have recently had a new bathroom suit fitted including shower enclosure (Aqata minimalist) on a 900 x 900 low profile tray. The plumber is having problems making the shower enclosure fit flush and square. One thing I have noticed is the shower tray is not level and runs down towards the...

thanks. Humax help got back to me and suggested disconnecting the box from the mains for 10 mins or so......i did this and it worked, all menu items fully restored. cheers

help please..... ...does anyone else have very wet or damp footwells in their puma or ford......someone has suggested it may be a leaky seal or leakin through the pollen filter........ ....any idea how to stop or remedy it....? any help appreciated. thanks

Help........My Humax freeview box has all of a sudden lost 2 options from the menu..........i can no longer select recoreded programmes or record scheduling......i have not done anything to cause this...... ....any one had similar problems or know of best place for advice ? thanks

advice please. I want to put up an outside pir light. I have power in my shed in my car port. I have a proteus cu in the shed which is fed from the cu in the house. the cu in the shed supplies 2 outside garden sockets, and 2 double sockets in the shed. Can I take a switched fcu off one...

cheers for your help. i had connected the neutral to the switch terminals, i have now connected the blues and bypassed the switch. all working safely. thanks