Search results

Thank you so much for replying, I just wanted to check the way the blocks are set out. The pendant had a row of connectors, from the left 2 L, 3 LOOP and 3 neutral. The spotlight has a block connector with 4 connectors on either side from the left 4th block provided for loop termination if...

The pendant had a row of connectors, from the left 2 L, 3 LOOP and 3 neutral. The spotlight has a block connector with 4 connectors on either side from the left 4th block provided for loop termination if necessary. In the 3rd block switched live from house supply to Brown (L) from light...

Hope someone can help before I go completely mad, I have 2 cables coming from ceiling one with 2 reds and 1 yellow green the other has 1 red, 1 yellow green and 1 black. I have connected reds to brown, yellow green to yellow green and black to blue, the lights come on but I am unable to turn...

Unfortunately the hot water temperature on my boiler can not be adjusted, its set at 55 supposedly but it feels a lot hotter than that

There has been a problem for ages, first tried a push on shower but that had the same problem with the hot water going off plus they used to blow off the taps. Thought a mixer tap would help but theres still a problem, I am unable to do any more about it because I live in council housing. Will...

It is delivering 5 litres a minute. The boiler is a Worcester Greenstar 24i Junior combi MKIII, it was put in October 2011. The pressure gauge keeps dropping and at the moment it is less than 1 bar. The hot water comes from the combi boiler and the cold bathroom taps come from a tank in the...

I have a single lever shower mixer on the bath which is fed by a combi boiler, after a lot of messing around eventually manage to get a decent temperature only after a couple of minutes for the water to go cold. The boiler shuts down and I have to then get the hot water going again only to be...

My mum had some work done in her bathroom by a total disaster zone, since she kicked him off the job the radiator valve between radiator and pipework has been leaking. It appears to be leaking from both nuts and no amount of tightening seems to stop it. When I try to tighten one nut the whole...