Search results

sorry dont know what top hat washers are, by the way they are mixer taps Thanks

I have put in a pumped mixer shower above the bath, now when we use the shower water is getting under the bath taps and soaking floor under bath. Really difficult to get at taps. would putting silicant sealer along edge of taps work?? thanks

my immersion heater is set to just below 60%, But the water seems to be very hot. How do I know what temp it is reaching. How hot does 60 feel to the skin. Thanks for any replies 8)

I am having troulbe with shutting down since installing network card, Gets as far as saying windows is shutting down then hangs, cant do restart as pc crashes.Is the patch for networking from microsoft Also having problems with norton antivirus crashes when scanning, the norton prob started...

As the shower is thermostatic and cuts off if there is a water failure from hot or cold, surely it wont matter if the feed to cold is higher in tank than feed to hot? havn't decided what to do but both pump and showers guaratees are voided if you dont come from tank :?:

Turning off system restore and running Avg :D does fix the problem. dont forget to turn system restore back on after running AVG

Thanks. I will come from tank, but I have a problem ,on pump instructions it says outlet from tank to pump should be a min of 30mm below the outlet which feeds the cylinder. I cant do that as the pipe which feeds the cylinder is right at the bottom of the tank so cant put new outlet below it...

Is it ok to tee off from the pipe which supplies the hot water cylinder, and then connect that pipe to cold water inlet to pump. seems easier than putting new pipe in from atic just to supply pump.. probably reason why i should not but cant think why. thank you