Search results

Hi Guys, I have a Baxi Back boiler with an old C3W firefront. I thought the boiler was Baxi 552 because the manual i was given said it was. I wanted to change the firefront to a more modern one. So i bought a Baxi V2 from EBAY. When the fitter took off the old Firefront it showed that the...

Hi Guys, I am about to buy a Designair Hood ( either GCH60SS or FGHD62SS). The description state that they need to be vented (ducted). Is it possible to convert them to recirculation? These are cheap pieces of kit and i cannot find any website for the makers. i think they are sold in B&Q...

Hi Guys, i currently have a Baxi Bermuda 552 Back boiler with a radiant fire front. The boiler needs changing because when i had it serviced it was noticed that the part where the flame is contained had some of the holes rusty and falling apart. I have been offered a 57/4M back boiler with a GF3...

Hi guys, I am fitting some 85mm downlights, but the holesaw i have is 89mm. The downlights have a lip of about 10mm. 1) Does the holes have to be exact 2) what difference will 4mm make cheers!!

Hi Guys, I would appreciate some help on a problem i have. I have a m reg Laguna which is over revving. It is very slow uphill and petrol consumption has increased. It sounds like their is an exhaust leak. 1) How do you diagnose whether it is cltch slip 2) Is there any other...

Hi Guys, I am just looking for some advice. I want to put downlights in a kitchen and a hallway but on inspection the ceiling appears to be of the acoustic type. It consist of a thin plaster sandwich with a yellowish foam substance in the middle. This is in a ground floor maisonette, so can only...

HI Guys, i would like to fit several individual downlights in a kitchen, but i have no access to the floorboard above. This ceiling is plasterboard. Can you suggest the various alternative ways of doing this. What about getting over joists? Cheers!!

Hi i would appreciate some help to my query. I have a new Spotlight fitting with 3 lights. There is a 3 block chocolate connector which holds the cables. There is two small wires (black and white) going from each spotlight to the block. There is also an earth wire connected between the block...

HI Guys, I live in a flat (apartment) and i am fitting a fan in the bathroom. I have no access to the lighting circuit apart from at the ceiling rose. Can i run a cable from the rose (burying it in the plaster. How would i do this? Cheers!