Search results

Never mind, got it working. For those interested, the Euro 46v10 uses the standard input for keyswitch latched operation. All you have to do is connect the NO & Common on the sonoff to the 2 a inputs on the Euro 46 and connect the 2 t inputs to override the tamper. Then in the control panel set...

Hi Bianco, I have a Pyronix Euro 46 panel (which I assume is the same as the enforcer) and the inputs connectors are labelled as below. Can you advise what the corresponding input is for the Z33 and Z34 input as per your diagram?

Thanks Notch7, I will take that into consideration. Cheers

Cheers, never thought of a triple unit good idea.

Hi All, I am putting in patio doors in a 3800mm opening and am looking some advise based on experience. Originally my thought was to put in bi-folding aluminium doors (KAT manufacturer) instead of sliding doors as I like the idea of being able to open them right back. Where as sliding doors...

Cheers for the responses. I contacted building control they said they will have to do a survey and the work will need signed off so I better do it by the book. I don’t want to affect the floor level so preferably I would like to double up if it’s an opinion, maybe with engineered joists.

Hi All, I have a question about joist suitability and possible strengthening. I live in a dormer bungalow which has an attic conversion (according to the previous owners it was done at the time it was built). At the minute the attic is split into 2 large rooms and I want to turn it into 3...

Agreed, but my wife burns a lot of toast. Seriously tho you make a good point.

Excellent, thanks for the advice I will give that a go!

https://www.tlc-direct.co.uk/Products/EI100R.html Ok, shame I was hoping I could disable the internal and external sounder just for fire inputs.

Hi All, I have wired 12v smoke detectors into my Pyronix Euro 46 panel and configured then as fire in the inputs. Currently when the smoke detector triggers the alarm panel , internal speaker and external sounder all go off. Anyone know if and how I can configure the fire inputs so it doesn't...

Hi Rob, Thanks for your advise. I have attached an image of the connector showing dimensions withou the fins the connector has a diameter of 84mm so the fins probably add about 10mm on. If I force it in could I end up damaging the connector? I haven't been able to find a flexible connector with...

Hi All, I just moved into a 1960's house and am replacing the toilet that looks like it has been there since day one! However I am having some trouble connecting the flexible pan waste connector to the old cast iron soil pipe. The problem I have is I cant get the soil pipe end to fit into the...

Hi, is it possible to increase the water pressure in a house with a PRV on the mains inlet? The PRV is an RWC 312c 3.5 bar. I would like to increase the pressure foe my shower. Thanks.

Don't have any of those thing. I might pickup a low pressure tap and give it a shot.

I havent a clue to be honest, is there anyway of telling?

Its a single mixer tap.

Hi, My parents live in a converted bungalow which has a bathroom and 2 bedrooms upstairs. They recently changed the sink in the upstairs bathroom and now there is no hot water coming out of the tap. When i investigated abit I found that the CWS tank is in the eves of one of the bedrooms. It...

Cheers, I am hoping to leave the top of the sleeper clear and putting the timber frame behind the sleeper to complete the chimney breast look. So you think the cemented breezblocks will be able to support the sleeper and 42" lcd ok?

Think I have mixed up my terminology, Odnt htink I should have said Im using the sleeper for the hearth. The sleeper will be on top of the breezblocks. I have attached a rough drawing, the chimney breast and breezblocks will be plastered but so you can see the structure I have drawn them in. Cheers.