Search results

A new pcb , took out the safety thermostat , checked it and put it back in, left the boiler off for a few minutes and then pressed and held re-set button for 10 seconds and it then just came to life, touch wood it has been fine on hot water and heating and havent had any flashing neons come on...

Hi there, luckily for me on one part my dad is a qualified electrician , and bless him he had already spent a day pulling all the boiler to bits and checking all the diverter valves, pins, voltages everything was as it should be electrically contacting - powers in and out etc, freely moving...

and now i have no hot water or heating :cry:

Hi again, we seem to be on a downward spiral with this boiler, have today been and bought a new pcb board and fitted it (£97!)- it is slightly different to my old one as the part number changed from 248074 to 5112380 (it is meant for baxi 80e combi) have switched it on and now the following has...

thanks again for taking the time to reply i really appreciate your help, right, the link is still in place i put the hot water on in both positions, in both positions the green light comes on boiller activates etc, turn the tap off the green light goes out, no one has pulled any wires off etc...

many thanks for the diagram, it confirms we have put the link wire in the right place as advised, but it hasnt made any difference , the boiler is still the same, just the power light is working, i switched it to DHW in the spring and has not been put onto CH until now, the boiler has been...

we have done exactly as you said, step by step - absolutely nothing, just as i described earlier the green neon 'power on' button is illuminated but nothing else is happening at all.

Hi in the hallway there is a 'baxi heating' external thermostat box, new batteries in it, and it clicks and the flame symbol appears (caling to the boiler for heat right??), once a while back the boiler wouldnt start was dead and it was because the box was on auto (this was when i had just moved...

We have checked some micro switches but are not sure where everything is located and it is so fiddly to get your hands into the bit where the pipes are, any help would be much appreciated.

also the pump seems to be free, we took the screw out and could turn it by hand freely, anyone pls help?

just to add only the green 'on light is coming on, the green radiator light is not.

Hello everyone, I have found this forum and hope someone may be able to help me... I have a baxi combi boiler 80e , it has always been fine it is 7 years old, i turned the heating off in the spring and have been on DHW ever since, last week put it onto water/heating mode and absoutely nothing...