Search results

Hey I have a boiler that is fireing up getting to temperture and getting all the radiators hot then goin off. It then won't comes back on again unless you press the reset button anyone no what could be wrong with it?

Hey I want to flush out my vented central heating system. I no I need to cap of the expansion vent to the header tank and the feed to the system. Does it then involve taking a radiator off and connecting the valve to the cold mains. Can anyone telling me the correct way to flush out the system...

Hey I am changing some radiators on a vented central heating system. Two radiators are begin fed rom the room behind which is the cellar. The pipes run through the cellar then up verticaly about 8/10inch to the go through the wall were the pipes run about 3foot to the radiator valve. I'm just...

Hey my central heating is losing pressure. Am I right in saying that if I turn off the flow and return valves on the boiler. This will enable me to determine if the pressure loss is on the boiler ( if it contuines to drop). Or pipework if it hold pressure.

Am I right in thinking that when testing wires with an electric testing screw driver. Its only the live wire that will make the end of the screw driver light up?

Hey I have some floor boards to take up in my bathroom, I no to cut down the boards over the centre of the joist so I can put the boards back down easly. So do I jus cut the boards to one side of the nails?

I have a cooker with a male thread on the back. I need to convert this to a female thread to except the cooker hose. Is the best way of doing this to use a female to female elbow (malable iron). Or do they sell purpose made adaptors for this. Thanks

Hey I,ve just had a boiler installed by a firm. However I have noticed as the flue passes through the wall its in contact with the wall insulation. The plumber said this was ok as it's only the inner duct that gets warm. Is this correct?

I thinking of replacing my combi boiler which is wired to a switched spur in the wall. Does the wire going from this spur just contain live neutral and earth wired to the boiler. Thanks for any help.

Hey I wondering on the correct height to install my new bath so the panel fits correctly. Do i measure the panel excluding the bit of the panel that fits under the lip of the bath. And set the bottom lip of the bath to this height i.e. the lip were you push the top of the panel under? Thanks for...