Search results

Any Heating Engineers on here ? Hello over the last month my boiler has not been working as it should, its never let me down before to cut a long story short, I came down the other weekend and it was freezing ive got breakdown cover and called them out twice now in the last few weeks, this time...

Yep your right its the light disabling the other, I covered one up and the other instantly activated so both were on, is there anyway to make them less sensitive to the light maybe even changing bulbs from clear to frosted would help.

So is that whats supposed to happen then? the lights are about 10ft apart

I just replaced two half lantern wall lights the old ones started playing up they were dusk to dawn with adjustable settings, they had seems to work fine before. I swapped them for two of the same shape but just PIR with noway to adjust settings. Light no1 had two brown wires and two blue...

Thanks all for your help but its still not fixed here is what has happened so far, this has been going on since November 2015. 1)First of all I couldn't get no hot water central when my heating was fine, A guy came and fitted a new 3 port valve. 2)Few days later same thing no hot water in the...

Thanks again for help so this is the scenario woke up this morning again central heating fine all rads are hot and I had hot water as I restarted system last night. Its 8.40am and hot water was supposed to have been running for last hour and half but bottom feed from copper cylinder is cold...

Hello Thanks for the replies, im not sure if they did vent the coil or not, I know they did not drain the system down to do the work, the pump has isolation valves top n bottom and they isolated and drained enough off from within the airing cupboard to be able to fit the 3 port valve and pump...

Hello All Ok I woke up 2 weeks ago with no hot water, central heating was fine so guessed it was the 3 port valve. Contacted my insurance company Home Serve and informed them of my observations, they sent a man round on a Sunday but he could only state the obvious and didn't have the part on...

When you say lock it in mid postion is this man position,My wife had chucked some cloths on it I suspect they have moved the slider what postion should this be in for normal use ? ive pushed slider upwards to man position it can go down to a ledge then be pushed round to open position thankyou...

Thanks for replying Yes I do its a silver box landis & staefa with a slider with open or manual it is currently in the open position, if it is this is there any way to test it ? Thankyou

My ch boiler only seems to be cutting in when hot water is requied,I had to turn my HW cylinder stat right up to 80 to get the rads to get hot, I noticed earlier in the day when I hit plus 1 hour for heating on the main central heating control that even though the amber light illuminated on the...