Search results

Hi all,.. just asking this question out of curiosety really....My sister has just had a repair to her boiler,involving renewing the flue fan, replacing the insulation and replacing the rubber o rings on the heat exchanger connections,the engineer also fitted a larger external expantion vessel on...

hi all ive got a vauxhall vectra 2.2cd....2002 problem is starts ok,but when i put the accelerator down past half way, there is no reponse at all,giving a max speed of approx 40mph,if i take my foot off pedal when driving,the revs do not decrease,think also bit off a misfire... can anyone...

Hi all....can anyone tell me,when fitting an o/s tap,does the copper pipe going through the cavity wall need to be sleeved?????? thankyou

hi all......... i have an 8mm feed to all my rads via a manifold,...would it be of any benifit if when repositioning a rad,to increase the bore to 10mm just above the ceiling (downstairs rad),or might i just as well stick with the 8mm thankyou all

Hi all.....i have a rad downstairs,that no mater what i do it remains cold.Ihave be told its likely to be a blockage in the manifold where it feeds the rad (8mm system),is it a good idea to remove , service and replace the manifold ,...any advice most welcome....thankyou ..Mike

Hi all....does anyone no if there are there any water/electric regs regarding fitting a pushfit water control tap to an electric sink heater(sadia express)basicly is this practice ok ......thankyou

Hi.....don't know if any one can help with my problem.Yesterday i was changing the control tap(water outlet tap) on the above heater,i had to drain it down to do this,unfortunately i forgot to turn off the electric to the unit,and have now no hot water.I guess there is a safety cut out fitted to...