Search results

Sounds like mine m/c . It also has an outer plastic cover for the drum and the hose from the soap dispenser connects to the front of it. It seems that hp and hoover might be quite similar! Anyway, the rubber hose supposingly seals onto the plastic drum but not that well. A friend of mine...

On the drum end there is nothing to tie around :!: . Is using a sealant completely out of the question :?: What is a front plate seal ?

Where it joins on the drum side the drum openning is not raised or recessed and the hose itself has a groove at the end sandwitched by two raised rings, and the whole thing seems to fix into the drum! There are metal ties all over the rest of the washing machine but I could not see find or feel...

There is a tie at the detergent drawer end but nothing on the drum side. Don't understand why it should leak as the water flows downwards. Unless there is a hole I didn't see or the water does not flow into the drum properly (I haven't noticed any excessive amount of water in the wash), and it...

Ok, the motor seems to have been fixed now. The engineer changed the module and we have had three washes with no problems :D . Back to the leak know, the engineer could not see anything but I managed to find the point of leak. It is the hose that connects the detergent drawer with the drum...

Have had some problems with my w/m as follows: 1. a couple of months ago I noticed some water leaking through the front right (near leg area). Water was visible on the floor tiles but could not trace it when I opened the back of the w/m. I also noticed white residue marks on the paper cover at...