Search results

Good evening I have recently stripped my en-suite pending a full refurb. I produced a design and have ordered units / shower etc. Upon removing the old vanity this morning I found that there is a cut into the en-suite from the stairway which is immediately below the en-suite. The old vanity...

Evening all I have a glow worm boiler which stopped working the other evening, I have a British Gas Homecare contract so called them out. They arrived the next day and spent a good 20 minutes or so spraying with WD40 and something else I didn't recognise. It still didn't start. I saw the...

Hi I have a galaxy 2 system with no external bell, just a dummy box. There is however an internal siren with battery backup. This is wired to the SAB connections on the panel, all connections used but strobe. If I want to add an external bell, can I wire it in parallel to the internal...

I have a gloworm 40ff boiler, danfoss fp715 HW/CH timer, and a Honeywell cm907 programmable thermostat. This morning the temperature was set at 21, on the Honeywell unit, however the temperature managed to get to 25 degrees - the boiler was running constantly. The normal setting on...

Hi There is a driveway to the side of our house which is used by the neighbours to gain access to their garage(s). There is a pipe on our wall which has a wire cage protecting it. The pipe looks like it could be an overflow/outlet from the water tank as the airing cupboard is above from...

Hi Over the past year or so i have been observing small movements (gaps) appearing between the porch brickwork and the main brickwork of the adjoining property. This started with small cracks but now equates to about 2cm at the most significant point. I havent recorded any movement in the...

Hello I was looking at where i could have a scale inhibitor fitted. Under the sink there is a black clylindrical unit that i havent been able to identify - can anyone help? Here is a pic. Thanks Leon