Search results

hi all, i want to add another switch to existing light so i can operate it 2 ways in another location at the moment the existing light has 2 gang switch one for another light and one for the light i wish to make 2 way any help would be appreciated thanks

hi i want to put up 2 lights to run off one switch how do do this thanks

really :shock: ..................anybody for a more serious answer?

hi all, could someone give me some advise on breaking down a garage with hip roof joined to my house i.e tiles,all timbers and blockwork many thanks 8)

its an r reg 1997 thanks

hi, speeds 1 and 2 do not work but 3 and 4 are ok any pointers would be appreciated thanks

thanks again fo replies guys , i live on new estate built seven years ago so by what you saying then someone close by has or is gonna have the same problem,how much will cost for me to have a new pcb and fitted

thanks for replies its a suprima 40 ,if it is the pcb failing is this dangerous to the ongoing day to day use of boiler i.e me having to press reset button and finally is this a common fault thanks for your help

i am having to press the reset button in order for the boiler to keep working does anyone know why this is happening

pleny of water in tank and pump is working

no hot water and boiler would not fire up unless i pressed reset button but ihave a sound like kettle boiling/bubbling sound from boiler is this serious problem what do need to do or get done thanks for any help

also sounds like the kettle warming up before the boil from boiler is that normal

pump does not run will check wiring to make sure nothing is loose from blocks yes there is a bleed pipe at bottom of cylinder as for pump you mean isolate pump by closing off vavles then try bleeding pump again sorry i sound so long winded

not sure what you mean in all respect but the boiler is a potterton suprema 40 with a 3zone myson mpe322 and a myson compact cp53 pump thanks again for your replies when i turn hw prog on then boiler fires up a few minutes a gurgling sound is heard from boiler which then travels up to airing...

and there is terrible banging knocking sound around the pump like as if something is loose

tried that thanks mine had a nut head then i turned on hw the shaft started spinning then turned off it hw after a few mintes it shut off but have turn on hw again and no movement from shaft anymore

hi, my dads been ill had to leave his car parked up for five weeks starting up car battery was flat as pancake lifted up bonnet to top of battery coverd in some powderey deposits any clues to what might of happened regards

thanks for replies guys, before i went away i turned off stop cock came back turned on hw at programmer my wife put some washing on a couple of hours later i start hearing banging/knocking sounds from airing cupboard plus gurgling noises making me think there has got to be air in the system...

torned on hw from a two week holiday after turning off before i left to find a alot of banging and gurgling noises coming from hw cylinder and other pipes i know its air but what is the best way to get it out and is it a good idea to turn off when going on hoilday thanks

thanks for your replies guys in the back of my mind i thought i might have to shut off gate valves to cistern hoping that you guys would say otherwise(after draining down to put a new shower in,it took forever) the gate valves didn't close down completley and regarding stop cock my house is six...