Search results

You will need to verify the security impact. However the below is a possible answer.Remember you are responsable for any changes and their impact This is probably due to the new LogonUI. Verify on the Event Manager if its failing. If that's your issue then try this in REGEDIT...

Yes on top apart from an existing strong base i want to raise the whole area by about 8 cm

No responses.. have i posted in the wrong place ?

are you using windows rdp or something like tightvnc?

I've got an old crazy paving patio, which while still structurally good, look its age, so I’m planning on facing it with blocks. My plan is (after pressure washing) to cement the outside rows in with a mix of 3 sand to 1 cement to form a strong outside frame. For the middl I’m planning on...

Tried again, and no leak until about 30-40 minutes from the end, when the rinse session starts, but now only a very small leak probably a few table spoons full.Still cant see where the water is coming from. Any ideas?

All i can see is a lot of lyme build up in the heat exchanger, especially above the waste pipes, cant even see which pipes can set water up to the maze part.

with the machine unplugged, and water removed laying on its side, the waste hose keeps jumping and i hear a dripping, how do i get the hose off, there appears to be some wierd clip which i cant work out. Also I had a look though the panel which takes water in and i cant see any signs on leaks

Can't see a drip at all , but about 45 minutes into the 115 minute cycle i found some more water in the base. If T turn the power switch off I head a dripping at the back (left may me) but cant hear a thing, also not sure if its the water i side the washing area or a leak When tilting (always...

I've realised that the base is not used as a sump, and should not contain water, I can't see any dripping when the machine is running, but there not much room to see. Any idea of common places on this machine for leaks

thanks I worked that out late last night while staring at the photo and then realised the pump switch was straight, and now its on an angle and workd, i.e. I have the fixing pins on the left of the switch in the mounting holes and not above the switch. Now everything works I take there...

I've got a bosch Exxcel dish washer where the pump kept running, found that the float in the pressure chamber was stuck with lime scale, Taken it all apart and cleaned and the pressure chamber. The dish washer appears to be working . There are two parts which concern me. 1. the red rod...

I have 20-25 year old aluminium double glazing (and external doors)in a 1960's semi, the glass does not appear to be turning blue, however every winter I wake up to find the windows dripping with water, and the wall paper around the windows(first 2-3 inches) growing black mold. Is this stuff...