Search results

Read the original post again NSTREET, He is trying to get the cables from below the floorvoid upto the socket, not along the wall behind the skirting. I have found the best way is to use a 20MM sds drill bit to tackle the masonry and then a flat woodbit with an extension bar to drill through...

Hi a switched fused connection is one of these http://www.mkelectric.co.uk/products/item.asp?itemid=4169&rangeid=1030 or similiar basically just a switch with a fuse on the plate to fuse down from the supply current of the ring main (30-32A) to either 3,5,7,10,13A to suit the rating of...

In my Oppinion your oven has not been connected correctly, It is quite possible that your installer has put a fused spur on the oven, bu that it has been hidden somewhere behind the oven or in the cupboards surrounding it. As the installation has been carried out recently and is in a kitchen it...

I am going to be sticking wedi board or marmox as it is also known to my screed floor, it will then have electric underfloor heating on it . Is it ok to use normal cement based tile adhesive to stick it to the floor or should it be flexible? NIck

Hi I wish to lay insulation on my concrete floor before i install electric underfloor heating. I have removed the old marley tiles and it has left a bitumen residue behind. It removes slowly with a scraper, does anyone have any better ideas as to removal.???? it is only an adhesive and not a...

Hello, i hope there will be somebody here who can help me, i have several boxes of PAMESA INDIANAP "P" porcelain tiles shad 1601 from the compactto range , left over from another builders job, the client wants these tiles to be laid in her kitchen, but i need some more to make up the numbers...

Well if its still not working, try ringing neff, they have a technical helpline who will probably be able to help, or if not, get john lewis to pay for an engineer to visit from neff to fix it, after all it was sold as an ex display thus meaning, never been used , just shown off. Nick

Hi, yes this oven does have a child lock, I have the same oven, but not installed it yet so i fished out the instructions and here s what it says If -5- is displayed the oven is locked to remove the lock turn function selector switch 3 times from the 0 position to the oven light...