Search results

Hi, Thanks for all your help. I've taken out the pcb; I was wondering where I could get a replacement? Numbers on the board are pcb 712529-01 electrolux 0102_0004B CHeers, Jon

Thanks anyhow. It did seem the lights were hard to follow. As a matter of interest, how would a code normally be flashed out? Cheers for the help.

Hi again. Both valves clean. Entered diag again and moved to 11 as quick as possible (75deg position) on the dial. There was still quite a few flashes and pauses and it is really difficult to tell sometimes if it is red-orange-green, or just orange or a quick red-orange... driven me mad...

Hi. I will take a look at it. The number at the end of the pnc is 05. Thanks.

Oh and I followed this for the diagnostics To enter diagnostics: 1. Switch off the appliance. 2. Press and hold down START/PAUSE and any one of the option buttons simultaneously. 3. Holding down both buttons, switch the appliance on by turning the programme selector one position to...

HI, I cleaned the filter, water container, checked the heater elements were clear, vacuumed the air intake at the back, drained an cleaned the filler/drip tray at the back (which had quite a lot of soggy fluff in it) Checked the drum. pnc 916 094 517 Does it have a water drainage...

Hi chaps, My built in Zanussi (The model is ZDF490x I think) Oven's top oven grill fell down when the screw threads had rusted away in the holes holding the retaining screws The grill hinges on the back of the top oven. I cleaned out the holes as best I could and got some metal wall plugs...

I came home to find the start button flashing red, but it seemed to have finished the programme. I turned it off then on again, a few seconds later it beeped and flashed red 7 times. If i turn it on and press start quickly it turns the drum, and warms up slightly before stopping a few seconds...

Hi everyone, I have seen on lots of previous posts about how to get the error codes and what they mean, however not how to recognise what the flashes tell you. i.e. I have a faulty zdc47100w which when I put into diagnostic mode it flashes red, and what looks like orange then red then green...