Search results

Is there anybody out there that can help me with my Hoover Vision HD Condenser Tumble dryer? • The problem is that the water is not being collected into the tank; I have cleaned as much as I possibly can of the dust or whatever it's called off the machine. • I tried blowing into the outlet...

Hi, Have done the test power does not get to the water pump, have returned the board back to the supplier and he has sent me another board, the 2nd board would not even get my washing machine to go. I again sent the board back and asked for a full refund, in the meantime i bought a CM2 146-80...

Hi Zipper, I have done a full check of the system, the drain pump is not turning, but the outlet hose is clear this explains the alarm that is coming up, I did a test run as you suggested in one of the earlier problems with another member, and the alarm is still 3 flashes with a long delay. I...

Hi Zipper Thanks for reply, does this mean that the pump is not gone? or is there a possibility of it having poped? Regards.

Hi Guys, This morning i received a substitute pc board, i have installed it and set my machine to work. All seemed to be well, while washing. sometime along the program the 90' and the stain vanish led's were flashing 3 times and then off for a while, this repeats itself all the time. This...

Well there was no way of my telling whether or not it was functioning, i noticed that the ribbon which feeds the LED's is connected to the pc board, since none of the LED's lit up, the possibility is that the board was dead. I sent it off to the guys on the link you gave me, they seem to be...

Thank you, I will give them a call tomorrow and see what they have to say. Best Regards. Perfeito Moreira

Dear Zipper I have removed the pc board and there is traces of black smoke attached to the board, as I have no means of testing the board, I'm assuming that it is the board that has gone. I hope that the damage is not extended to any other part like the switch or the motor, if so I may as...

Hi Zipper, This morning I tested the power flowing through the supressor and it is there. Any other idea that i may try before i dip into buying boards and other equipment? Thank you for your help. Best Regards, Joe

Thank you Zipper, I will try that out and let you know what happened. Best Regards, Perfeito

Thank you for your reply, I have removed cover, but the only way i have of checking if it has popped is either by: connecting directly by-passing the surpressor or by means of multimeter which i can't find mine. is it safe to connect directly by-passing the surpressor?

I have a Candy Grand O GO146, yesterday the mains power went off, when i restored the power, the washing machine was not working. by process of elimination, i checked the fuse in the plug, by exchanging it with another working appliance. that was ok. the power is not geting to the program...