Search results

Thanks for your great detail , the screed is approximately 75mm thick if I leave it for 5 days do you think it's ok to self level ? Should I prime the screed with sbr or poly bond 5-1 ? Also there's loads of fibres poking through any tips on how to flatten them off as I'm sure there going to...

I've just laid a sand cement screed with fibres in but need to apply a floor levelling compound just to get it spot on How soon can this be done ? Manny thanks rob

Hi I'm after a hallway tiling in 4" Victorian tile in diamond pattern black and white with a 40mm border then a 25mm border next to it the hallway is 950mm x5m it then goes into a downstairs toilet approximately 1200x 100mm with same tile arrangement The floor has been prepared and joists...

As above any recommendations Cheers rob ******* the duplicate posts have been removed please see https://www.diynot.com/diy/threads/forum-rules-general-info.19448/ Mod. *******

I think it's just a case of marking c/lines on the jig and rails etc. then if you line everything up prior to drilling you can't go wrong,

So am I right I have to drill straight down into let's say a 3"x2" x 12" long then cut it across @ 40deg on the 2"section & that's it, thanks for your support rob

There glass

I need to drill some handrails and base rails at approximately 40deg about 90 holes at 30mm diameter for 30mm round spindles the handrails and base rails are not yet fixed anyone got any good tips on how to go about this? Thanks in advance rob

Got a shower pump runs shower fine I just teed in my bath and basin taps but it won't kick in when taps are turned on Any comments appreciated thanks rob

Can anyone recommend a a good diamond core drill to drill accrington nori brick I'm sick of being missold crap

:D thanks for your help

Hello , I'm looking to buy a cat ladder for occasional can anyone reccomend a decent one , thanks in advance rob

Hello all , I need to fit 6"x3/4 solid walnut flooring to a asphalt subfloor , is it possible to acheive a good fix ? Can anyone reccomend glues & best procedure thanks in advance rob

Hello all please can someone give me advice , I have some mdf panels with 44 mm pine border , I plan to paint with oil based eggshell , do I need to prime or undercoat first & whats the difference of the two , a painter on the site said there is no need to prime or undercoat just apply knotting...

Hi all , I'm thinking of installing a Woodburner witha twin wall flue system the problem is the system from my coal yard is £1200 approx & when I checked on the Internet for the similar system it works out30% cheaper online , my problem & worry is im not familiar with what products are good...

thanks I can understand that

can someone advise me the best way of removing odd size slates from a end terrace & felt & batten then put back the origional slates , thanks rob

can someone please advise me how i should go about removing ton slate they are all different sizes , i want to replace the felt and battens then put the original slate back , ,any advice is welcomed , thanks in advance rob

thanks for getting back , sorry for my ignorance but how do I adjust the heating output and what should it be set at cheers rob

hi could anyone please advise , i have a worscester 40 he combi , its oversised as i wanted a good water flow rate i could manage with a 30 kw , what water flow rate would this give me compared to a 40 , im only thinking of changing as i think the 40 uses more gas than a 30 to heat up a 4 bed...