Search results

The point is, Part P Quoters I am not part p registered, AND i do not intend to get part P, for the simple reason is i pay enough sodden money out as it is, without paying some duff organisation of pen pushers £500 to tell me im able to carry out work on some poor buggers CU when i already...

Been fitting showers for few months now with no problems at all. Got a triton Ts80 today with thermostat gone, im assuming thermostat, put it on number 10 it was scolding, anything either side of dial freezing. Tried every other configuration possible, it was deffo kapplunked... what i want...

hello all, im a spark who fitted a shower today, i fit them every other day with no problems whatsover, but this frickin house today... The job was to replace a shower that was about 1000 years old, it had a feed leading into it from this old shower so the plumbing bit was already...

Is it possible to have about 12 recessed downlighters in back kitchen, and all worked off the one switch? And if so, what would be best, LV or mains lights?

Just about to complete 2360part1, anybody know any firms or agencys to ring around lpool area, for start as mate? Cheers _____________________ moderator please note 4

Hello all, Can anybody tell me what connection to use on the plastic outlet of an electric shower, would you use metal compression or plastic pushfit?

Hello all, I am looking for a double cooker switch combining the extra 13amp socket. No problem i hear you say.... If you were to look at the switch on wall, i want terminals to be on right instead of left, not bothered about make or style just need one... Or is it standard...

Is Corgi the official body of plumbers? if not who is? cheers

Hello All took a bath panel off the other day to try and change taps, got the cold water one off, which was nearer to me no probs. I then came to the far hot water one, i litterally had about 3inches to spare, i could not get my conventional spanner in to loosen the nut to get pipe...

Can anybody elaborate slightly on "Insulation Breakdown" Its to do with fault finding on a radial/ring circuit??

If i get NICEIC registered, does that include me for part p registration? NICEIC website is a bit vague

I went to a job today to wire in 10mm shower cable to a CU..somebody already wired from shower down to CU.. As their was no free fuseways on old wylex rewirable, somebody wired the old 6mm cable into the two meter tails on CU...has anybody come across this before...?? I ended up fitting...

on a shower run consisting of 10mm, does anybody regularly put 6mm from switch to shower, if less than say 2feet????

Hello All, I am about to fit a UPVC ceiling, i have done one of these before which was quite successful, i glued it to the ceiling, its the type were the border goes around top of walls to support pvc. The ceiling i am about to undertake is a false ceiling, with the square...

Hello All gonna put in 8 downlighters in back kitchen, can anybody reccomend brands, watts, transformers, just anything to put me in right direction please...also will these be run off their own radial/ring?? etc

Scenario: 3 overnight storage heaters 2 work, 1 does not Seperate consumer unit for 3 breakers meter comes on between 12 and 7, can anybody tell me is it possible to troubleshoot this problem without tampering with the meter, and without working between 12 and 7. Cheers

Do these generally come with 2 screw fixings or more? I would prefer 4, with at least 2 of them secured to a joist, what is the norm? Somebody wants me to take light down and fit a fan, but as usual with lights, they are barely hanging onto the plaster on its lasties. hope i dont have to...

hello all, at moment i have concrete fencing all round garden, problem is its not high enough for me. Seen these wooden panels from b&q, about 4ftx5ft that would go around concrete fencing nicely, about 3ft on the concrete and about 2 ft high over top of fencing. All i need to know is best...

1: Can anybody tell me were i can get earth sleeving to cover 10mm cable, tried most diy retail outlets? on the subject of retail outlets, couldnt believe how expensive twin + earth is from B&Q, takin the p**s

An extractor fan and cooker ignition switch should be run on (1.0 1.5mm) from a switched (3 to 5amp) FCU, preferably from a 2.5mm supply. would anybody come off the cooker switch 6mm for the FCU??