Search results

Yes, looking in the trap, the membrane now just stays open so I'll need a new one. I see that I can buy one with a tundish adapter, that seems the best option. This was done 10 years ago when the house was built, I only bought the property recently!

After having a blocked drain a few days ago (cleared now), I've noticed a slight sewer smell in the house. Our unvented cylinder discharge connects to a HepVo trap however, this seems to be the cause of the smell (pics attached) It appears that the discharge pipe is pushed right into the HeVo...

Thanks! As it is from 1994, do you think it should be tested for asbestos?

Hi, Can someone help identify what type of board this is? It is fixed to the inside of the kitchen cupboard housing the boiler. The house was built in 1994 still with original kitchen, so am I safe to assume that it doesn't contain asbestos? The board itself is 6mm thick, white...

Ok, yes that makes sense (and was what I originally thought!). Should have used a chocbox after all. :( The electrician said exactly that, "All terminals should be fixed to a base"! So in your opinion are those click connectors actually against the regs? The connector is just resting in...

Thanks for the advice! I had to run T&E into the new light due to the wooden supports in the ceiling making it impossible to make a hole directly under the light so I sleeved the inner cores as suggested. I decided to sort out the floating choc-block behind the other two lights by adding a...

I'll make sure the outer sheath comes into the light fitting and buy some heat sleeving tomorrow. I also notice that these lights have the cable entry hole right next to the bulb holder! :? I've found that I can re position the bulb holder in the lamp to be further away from the cable...

I didn't buy it new so no instructions! Also couldn't find any online. Would you only sleeve the inner cores of the T&E? Normally I would make sure the outer sheath of the T&E is inside the fitting (or back box or whatever) but in this case should I strip the cable longer and only bring the...

Hi, I've got one of these which I'd like to install: http://www.amazon.co.uk/Micromark-MM18541-Kingston-Luminaire-Chrome/dp/B000EBGKAE Inside there is a choc-block next to the lamp holder which I would have thought you could just connect the 1.5mm T&E (loops at the switch so only 1 or 2...