Search results

Hi Guys, Any suggestions would be appreciated as I am trying to sort a programming issue via wintex. When I set the alarm, by default, Area A - Internal & Area B - external arm. When I unset the alarm, by default, Area A - Internal & Area B - external disarm. The situation arises...

That's the thing, I am unsure what caused it, but the 8xp(w) has just been added to the system. It is possible that the fault may have been there upon introduction. I am wondering if there could be a bug in the software as I reset as suggested and it hasn't come back.

Its worked, the fault has cleared now..... Thank you :):):):) :D :D :D

Thanks ever so much for coming back to me on this... Its a little to late to experiment tonight but I will let you know how I get on thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :D :D :D :D

The panel is latest premier elite 24 v2.11, is it possible you could you explain the other way without having to do a power cycle

I have checked via wintex diagnostic and the 8xpw lid tamper icon is shown as closed and the radio rx tamper icon is illuminated. I am only using the 8xpw system as an add on for radio remote function at the moment so all zones are secure as no further devices are installed. Is there a way of...

Have got the texecom 8xpw????, what is it looking for, thanks for response

Hi guys, Anyone online as came home tonight and the panel was complaining radio rx tamper, what's this mean, any ideas.... Thanks

Guys, just researching the 17ah batteries... How are you pro's connecting these into the metal housing texecom panels. I was looking to connect a yuasa 17ah but the terminal connections are the threaded m5 bolts... Don't really want to cut and bodge in any silly eye terminals... Does anyone know...

GOOD MAN, Thanks for the response :)

Anybody Know????????... BUMP BUMP BUMP!!!!!!!

Sorry, yes it is the metal housing 24 elite... Can the 17ah get popped in there with the jumper set to 300ma???

Hi, Looking to replace a battery in the elite 24 panel to extend run time on power outage. The existing battery is 1 x 7ah and it charges with the 300ma jumper selected. The system is running at the upper threshold on the current draw side of things so couldn't really amend jumper to 750ma...

All sorted TTTTTTHHHHHHHANNNNNNNKKKKK YOUUUUUUUUUUUU :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Thanks for your reply... I am hoping you may have resolved this for me... Dial all numbers is not ticked. I have just referred to the manual and it say's... A - Dial All Numbers If the communicator is acknowledged by the first ARC, it will continue to dial any other programmed ARC. This is...

In arc 2 I have the following - dial attempts, 1 - protocol, sms messaging - boxes ticked, use area accounts, enable gsm & use gsm first, all others are blank - report for, area a & area b - reporting options, priority alarms, alarms/cancels, open and close, tamper alarms - mobile numbers in...

Hi guys, Any help here would be appreciated... I have latest texecom elite 24 panel, com ip and com gsm modules. I don't appear to be able to get the com gsm to work properly. The com ip is plugged into com 1 & sends over all open, close and alarm activations successfully to a remote pc at...

I just had a look at the rm8 manual and it shows the two pins at the end as 12v output... Only inputs I can see is channel switch input. Any ideas, would be grateful

o.k.... thanks.. so we can hook up panel outputs etc but any ideas on the supply input to run the board I can't see this aspect in any images... it is 12v aux in anywhere????

Guys, Any ideas would be of a great help please.... I am looking to add on some n/o & n/c relay options to run some ancillary devices, can the texecom rm8 be hardwired and if some how would you wire to the board????... Thanks ever so much :lol: