Search results

Hi fella if possible square all your windows and doors with stainless angle beads. Try and drop the building in one without using drip beads as they hold water and will go black aventually. Whatever finish you put on it.

Please help. My betacom 30 wont light when you switch boiler on it clicks instead then red light. But if i run hot water the boiler lights up then switch heating on for 30 seconds it stays on. Losing pressure as well. Any ideas please.

thanks for the reply guys, the prob isnt the expansion vessell as i put 0.7 bar of pressure into it with a pump. used the filling loop to top it up further then it kicked in at 1.5 bar, it heated nicely, pressure rising, removed couple of pints outa the rad and it levelled ofF just under 2bar...

Hi thanks for the advise. I pressed the valve on the expansion for the second time and only air came out. The boiler is about 4year old and havnt been a problem but due to the recent cold weather it suddenly started 2play up. Ive just had to leave water out of one of the rads again as it went up...

thanks for the reply. had a look at the link, the pressure vessel is in an impossible place at the back of the boiler, after finding that little valve i pressed it and a miniscule of a dripper came out and a little air, so is it still the vessel or something else.

i got a glow-worm 30 and it loses pressure all the time. ime in a three storey with ten rads and the boiler is on the bottom floor. ive kept the boiler running between 1.5 and 2 bar for ages without problems, but the pressure started to rise to 3.5 without reason. i changed the filling loop to a...

i got a glow-worm 30 and it loses pressure all the time. ime in a three storey with ten rads and the boiler is on the bottom floor. ive kept the boiler running between 1.5 and 2 bar for ages without problems, but the pressure started to rise to 3.5 without reason. i changed the filling loop to a...