Search results

  1. A

    Pug 206 help!

    the wife's 206 seems to have a bit of a problem, she was on her way to work when the engine warning light started flashing, she had no acceleration and it was very 'chuggy'. Just having a look to see if there was anything obvious, took the oil filler cap off and it is blowing air out - does this...
  2. A

    45deg external angle - how to plaster? *sorry for rpt post!*

    all in the subject really, need to re-skim an external 45deg angle and would like a nice crisp finish - does anyone sell external 45degree (thin-coat) angle beads? or is there another way? cheers :D
  3. A

    45deg external angle - how to plaster?

    all in the subject really, need to re-skim an external 45deg angle and would like a nice crisp finish - does anyone sell external 45degree (thin-coat) angle beads? or is there another way? cheers :D
  4. A

    new for old

    the 'SUPERSWITCH' heating controller on my boiler finally packed in (date stamped 1982!) so I have replaced it with a DANFOSS FP715. Connected to the old controller were the wires for +ve and -ve, CH on and HW on, with the remainder of wires connected behind in strip connectors. I transfered...
  5. A

    bricking it

    I am about to tile a shower cubicle, it is in an alcove, I am going to tile the back wall first, question is - should I mitre the edges where they will meet the other two walls, or just leave them square and butt the others up to them? They are 200x100 ceramic tiles (put in a 'brick' pattern)...
  6. A

    rad valve tool

    fitting rad valves, is it an allen key to tighten the coupling part of the valve which screws into the radiator itself? if so what size is it please? cheers! :D
  7. A

    tap-off?

    I am in the process of installing a new shower cubicle where I have ripped out a poorly fitted mouldy effort, thing is the electric shower is reasonably good and I am going to re-use it, but it had an isloating valve fitted to the water inlet pipe(which can be turned by hand). I have never seen...
  8. A

    downside up?

    I am going to put a vertical radiator in my kitchen in a gap between two doors, the floor in there is tile over concrete, so obviously the pipework is going to be a drop from the ceiling above it, rather than do a full drop to meet the valves on the bottom of the rad, can I mount the rad the...
  9. A

    flexible thin-coat bead

    Does anyone know who stocks flexible (i.e. for doing arches and the like) pvc(ish) thin coat bead for plastering - I know it exists as the plasterer who taught me my erm.... skills :lol: gave me some last time. He said it was only available mail-order, anybody? cheers :)
Back
Top