Search results

approved inspectors seem to be becoming more and more popular these days, so much quicker and better to deal with than the local authority.

Best make a start mate, planning permission only lasts for 3 years. Unfortunately you've already gained the service I could have provided to you unless you don't have Building Regulations Approval.

Fair enough Tony. He's not being paid as he is planning an extension on his house so its services for services (except parts) at the moment. Thanks for your input though Tony. Nick

Oh Tony don't do that to me. Is it likely to be sludge is the system, he has put a cleaner into the system but its it more or a rads off the wall and hose out properly to clear them out. Cheers Nick

Good morning, I have a rather annoying issue with my boiler at the moment and now its really cold outside the rooms are not reaching the temperature on the room stat. The boiler will fire up and run until the leds on the panel reach 80ºC, the boiler will then shut off and start to cool down...

Can anyone recommend a decent set of the led strip lights. Ideally need 5 strips. The ones I have found have 1m tails on them do these link each strip or go to a transformer as information I have found isn't very clear to be honest. Thanks in advance. Nick

It's more for contractors to price as it outlines what type of install is required, manufacturer and products reference's for sockets, switches, light fittings, consumer units etc. also has installation guidance and relevant BS reference for each clause of the spec. Most of the time in our...

V90 is a section within the National Building Specification (NBS) for domestic installations as stated above.

I was thinking of only having the under cabinet lighting on at the same time as the cooker hood as it is a switched DP FCU. the vent for the Hood isn't connected to the outside via ducting so is only really used for the lighting over the oven as don't want sh*t blown out the top of it onto the...

Hi guys, first post on here, I've tried searching but haven't found a answer to my question. I have had my kitchen refitted and is currently all skimmed out and tiled wall units up etc. I have a FCU taken off a double socket with a vertical 2.5mm T&E feed to a flex outlet above the wall...