Search results

Dimmer switch fail? Switching on and off per the readings on the pendant fitting

Same problem here but lights on a dimmer switch power to light pendant reads as per 230 and tiny 0.3 wonder if my issue is a broken cable inside the flex

2 wireless fitted and wires removed and JOB done all tested and back in the Game!! thanks to all for your help ciao

They are brand new but the one in the corner is an old one but looks like they used as a junction box wasted so much time on this, maybe ditch them and get 2 wireless and take all that out the equation. see if ScanTronic will let me swap over… didn’t think this would be that much agro TBH...

The thought has gone through my head as well as we have 7 wireless ones as well and they were A dream to instal. Maybe that’s the best idea, as this set up seems a right hash job

Think he had a mask and the horses name was Tonto What Acessable is 4 cables at both PIRs red Black Yellow blue back at the panel however, there is 8. so I’m guessing they cut off the remaining ones at the PIR they we’re wired with only using the 4 above originally. Have Black read yellow...

Yes I do and I’m looking for resistance or voltage? Here? I’m pretty sure when they wired this section up we had an issue where the PIR in the kitchen was left in the corner, kitchen fitters built the cabinets and when the alarm people came they couldn’t get to it, so they spured off the one in...

Thanks so much for taking the time to guide me on this, have wired as per but trouble I have is both these wires are into the wall one behind a built in kitchen cupboard and the other side a built in bookcase. So I have no way of being sure I’m running the power onto the next one but using the 4...

Hiya Thanks for taking the time etc to help me with this, but that doesn’t work but trouble I have is these Two PIR are both wired into the wall in seperate rooms but back to back but there’s a bespoke bookcase been built around it, so I can’t confirm if I’m running the 2 wires onto the next...

No they don’t they spured off the existing cables here’s the original wiring set up PIR 1 first pic PIR 2 Second pic this is how I wired the other PIRs - third pic

Pannel and resister set up as remaining PIRs…..all working

That’s been rectified now and all sorted it’s juts these 2 PIR on the same cable I need to sort and I’m done so at….. PIR 1 - I’ve wired as per the first photo PIR 2 - I’ve wired as per the second photo and at panel I have wired as this with no resistors and only option at keypad I...

Don’t Won’t name and shame them, as the guy took his own life……. so just trying to sort this out without any more cost or upset to to anyone difficult situation to say the least

Pic

So if it’s wired like this? Does the Takper need to be bridged or with a resister? if the rest of the alarm is and 2k/4K is selected as choice sauce

Thanks you Trouble is I only have 4 wires for these two PIRs the rest are 6 wires but only using 4 as per the first photo with resistors. that’s what’s confusing and I can’t get behind them and look as they are both been boxed into a bookcase and kitchen cupboards. so no idea how they are...

Any chance you could write thats essay as I have a 4 core cable to 2 sensors that are back to back to each other in 2 rooms and I can’t get the buggers to work im on a Eaton Ion40H and the keypad doesn’t like it for some reason I feel it’s the power source as when I connect that to the Aux...

No expander the keypad does give you an option of choosing what type for all then you can individually change them ie for the 2 door contacts will amend them to 2K2 cheers bud

Small update now being told the panel needs replacing Again…… well think I’m there when it turns up one last Q if a PIR has been spurred off another one, you just run that as if it was just a normal single PIR? TY all

Re this I just used tamper and added a 2 ohm one to the blue wire at panel