Search results

Just to update everyone, had a little look at the boiler and after watching it firing up noticed the flames looked ok but gradually reduced and went out. Suspecting either gas supply issue or starvation of oxygen. Checked the flue outside and found a piece of wood had blow over and was slightly...

Hi all searched hi and low for some info on this issue but only seem to find help for when boiler not firing up at all. The problem, although not a big problem, is when firing up the burner lights and then goes out straight away between 5 to 10 times before staying a light. This happens for...

Sparky123 I may use your lovely quote when requesting the course that sound like no one would have a come back with rejecting the request. Fantastic lovely wording Thanks Ian

The work done is not domestic but sometimes involves 3-phase, 240V & 110V, working inside cabinets changing relays and motor drives. Non of the other employees even supervisors are 17th edition trained. Plans are followed by means of hard wire diagrams. Thanks Ian

All Right All I have looked for help on the above issue and cant find any, sorry if I have missed it on the site. Anyway want to know if being a, lets put it, industrial spark working in factory on robots and cabinets etc. i am required to be 17th edition trained. I have got my 16th...

Alright Had a quick search but did not find what I require. I am putting up patterned wallpaper, but the pattern is not on the edge of the paper so it does not have to match. I was wondering I know its up to me what I do but should the pattern line up Thanks to anyone who replys I know it...

Thanks everyone for your advice told hime to get a check done to confirm evrythin within spec. Also some wire is grey T&E and some white T&E does this make any differance. Thanks again Ian

Alright to all Just a quick one, a friend has been told that the electrics in there house requires modernisation. I have seen that the consumer unit is the old push in fuse wire cartridges and some of the plugs look quite old, but the house was rewired about 20 years ago and is single...

Alright I have seen a couple of topics about GU10's being well not so good, but I am having a bit of bother. I have fitted 2 fittings into the kitchen with 4 GU10's on each running off 1 switch. Every couple of days a bulb blows. I have changed them from 50W to 35W yesterday and this morning...