Search results

Fitting a wall mounted extractor fan in bathroom, the bathroom has a flat roof so was wondering if i can wire the fan to anywhere other than the bathroom light fitting, ie the light fitting for the room below, if so i take it i won't be able to use a timed fan due to timer run off light switch...

Apologies if this is old topic. Is it possible to freeze pipes to upstairs radiator, insert push fit inline valves to isolate the system and then move radiator to different wall. I have a combi boiler system, and can't find the system drain valve.

Thanks for the reply, there are 7 rads on the system in a 2 bed house so not a big system. I think venting is the first thing to try and go from there.

Got a worcester greenstar 30si. Could anyone tell me what the press should be when the central heating is on, it was just over 2.5 bar last night and making a low hum. Its for a friend at work who has just had a complete central heating system fitted, i thought it could be air and told her to...

Thanks for the replies, turns out it was a sticky float within the pump, a good technical tap and a refill seems to have sorted it out, it is still a little noisy so maybe the fact it ran dry may of damaged the bearings, i'll keep an eye on it.

Apologies if this as been posted before. Should my extraction pump from my boiler a worcester bosch 28i make an high pitch squeal when it pumps out the condensed water.

Thanks for reply, i took the vent plug off to prove it was free to turn but can't prove its running as the fuse blows everytime i turn it on. I know it would be easier just to change the pump but the person i'm doing this for is skint so i'm trying all avenues first so any other ideas are...

Firstly thanks for earlier replies on the se 80 pump. this is still the same problem really, the 2amp fuse keeps blowing. I stripped the electric connection box off the top and it was wet inside (due to pressure switch leak), dried it all out but to no avail. With a good fuse in and the main...

Hi this is my first post so be gentle. Problem started with a sheared water press switch, water everywhere. Replaced this but now the 2A fuse keeps blowing on the PCb. Disconnected the pump and fan connections on pcb fuse did not blow, replaced them one at a time only blows on the pump, there is...