Search results

  1. M

    problem with Scantronic 9448 + alarm

    Replaced with new battery , Thank you ( Alarm) followed your instructions just needed to enter my code to reset , was careful with the lid tamper spring now working fine . thanks for everyones input.
  2. M

    problem with Scantronic 9448 + alarm

    Thanks ,what is the engineer code ? will i find this when i open it up or will it be in the manual ? Thanks
  3. M

    problem with Scantronic 9448 + alarm

    Thanks for the reply, where is the battery located and how easy is it to change ?
  4. M

    problem with Scantronic 9448 + alarm

    Hi , I recently had a power cut , and the alarm no longer seems to work, I enter my code but this does not activate the alarm, the power light is on and the led light works on the keyboard. the motion sensor is working what has gone wrong ? just one thing I noticed when we had the power cut...
  5. M

    alpha 240 eco

    Thanks for the reply can this be fixed with a service pack or will I need a new diverter valve ?
  6. M

    alpha 240 eco

    hi, hope you can help, my problem is I have no hot water . but the central heating works fine. when I turn on the hot tap, the boiler does not attempt to start up. this has been a intermitent fault but the boiler has always started up. I have noticed that when I had used the shower the radiator...
  7. M

    Alpha 240XP hot water issue

    I had a simular problem with my Alpha 240 eco combi boiler, it turned out to be the fan was a bit clogged which affected the air pressure switch . i'm not saying this is your problem but it might be something else to check :idea:
  8. M

    problem with bathroom tap water flow

    Thank you for help and advice kevplumb. regards
  9. M

    problem with bathroom tap water flow

    It looks like i will have to replace the tap . just one thing if the flow from the tap is slow would this not open the hot water valve in the boiler ?
  10. M

    problem with bathroom tap water flow

    thanks for the reply kevplumb , i live in a hard water area , there is a small build up on the outlet of the tap but not much, could the inner working of the tap also get build up , if so, can this be stripped down or would i have to replace the tap ? thanks in advance
  11. M

    problem with bathroom tap water flow

    Hi, I have a problem with my single lever 'Roca' bathroom tap , the flow of water coming out is quite slow and when i move lever to the hot position i get no hot water. the boiler does not attempt to start up !! I have a Alpha 240 eco combi boiler which heats the water. when i operate the bath...
  12. M

    Alpha 240 eco flue or fan warning light stays on

    For those that might be interested, I had an engineer come a look at the boiler. He diagnosed that the fan needed cleaning, striped the fan and cleaned it all is well. I posted a previous thread, reference a problem with having a shower with the water running hot then cold,hot and then...
  13. M

    Alpha 240 eco flue or fan warning light stays on

    Hi, When I turn on the central heating the boiler will fire up and produce hot water to the rads, after the heating has reached its temperature the burner will switch off. When the burner shuts down the neon light comes on and stays on until the boiler starts back on again, then the light...
  14. M

    water stays hot for a short time then runs cold

    Thanks for the reply :D is this a fairly easy job to repair :?: or do I need to call in a plumber :?:
  15. M

    water stays hot for a short time then runs cold

    I have a Alpha 240 eco Combination Boiler, when I use the shower or hot water tap ,the water takes a time to heat up. once hot it stays hot for about 30 seconds, the runs cold. I hear the boiler burner start up and runs for a short while then cuts off. the pilot light stays on. when I use the...
Back
Top