Search results

Does appear to be the panel. In contact with Texecom for repair/replacement under warranty. Thanks again for the help.

Thanks Alarm, will check your suggestions at the weekend.

Yes it is set to flash on full set It used to flash momentarily now in flashs 14 times Can set it not to flash option 7 and it does not flash.

I fitted a Texecom Veritas Excel and Reson8 bell box in June 2010, now i find when setting the panel the strobe flashes 14 times when set instead of momentarily as it did previously. The panel sets ok and every thing works. Any help would be appreciated

Thanks chaps going for the Veritas Excel, looking for best price.

I need to replace my 14 year old Paragon Plus panel, any recommendations please. Thanks

Bell box now fitted and working all tests OK. all LED's working. I checked all the connections in the panel and bell box reset the nvm powered up the panel did the tests and every thing seems to work fine. Thanks everybody for the help

Bell fuse ok. Will remove bell box from wall and check with link cables to panel don't like working off ladders!

Wired as 2nd diaagram but unable to conrol sounder when powered up had to remove all power surples to stop sounder (Sorry joe-90 but thats the way the installation booklet read) Any more ideas please?

Have got 12volt at TRIG- Just found some more information on Paragon Plus panels which reads Bell box STB- to STB- TRIG- to BA HOLD OFF- to B- HOLD OFF+ to B+ RTN- to BT Will try this tomorrow

Wired Reson8 as instructions strobe and sounder work but no status indicators ie No red led to indicate hold off supply is present No Green led to show that the tamper is closed and healthy No red led to show battery charge When enabling Nicad battery with jumper instructions...

Thanks again Ivsystems

Reson8 installation instructions show STB- to -Strobe or -ST TRIG- to Bell- HOLD OFF to Tamper supply- HOLD OFF+ to Bell+ RTN- to Tamper return-

Thank you Ivsystems for your fast reply

I am wiring a ADE Reson8 bell box to a Paragon Plus panel and wish to check if my wiring is correct ? Reson8 STB- to STB- TRIG- to B- HOLD OFF- to BA HOLD OFF+ to B+ RTN- to...