Search results

I Have a Glow Worm Flexicom 18sx, which I have to up the pressure on every couple of weeks or so. I know there must be a leak. There was a wet patch under the boiler yesterday when I had to add water. I rang for someone to come out and have a look and they said that it may not necessarily be...

I don't recollect ever getting a free diagnosis before. I was charged £45 for the call out from the engineer. Apart from checking things like condensate levels I have no intention of repairing anything as gas scares me. Another more local engineer has been booked for early next week. I will get...

Glow worm Flexicom 18sx. Approx 16 months. Thought about service recently before this happened. Had a look, trap had grit in it. If only the engineer looked a little closer, the leak he had attributed to the condensate trap (which is perfectly ok, no splits), is actually coming from a...

He said it was just general crud from the heat exchanger and atmosphere. There is a leak somewhere as the condensate is dripping out from under the boiler, but there is some coming out of the other end of the drain. Boiler now gone off again. I'm am going to have to look later to see what he...

Got meter checked out first. Nothing wrong with it. Got repair man out today. He has said the condensate trap has blocked and split. The boiler started first time while he was here and is still going now. Quoted £195 to repair, but part not available for 3-5 days. Am I just waiting for the...

Recently our gas meter has been squeaking while the central heating is running. Now our Glow worm Flexicom 18 SX has started coming up with the F1 error message. My question is are these two linked? I have read somwhere that the F1 message was to do with the gas supply. Is there something in...

Thanks, Just to make sure, out of the following terminals: Strb, 0V, Tamp, Bell, +12 I would disconnect the Bell?

I have just finished installing a Veritas R8 system with 3 PIR, 1 Magnetic, Oddysey 3E Bellbox. I have gone through the walk test and the sounder check OK. Is there a way to silence the external sounder while the system is checked for a week or two, just so I don't upset the neighbours if it...

firegazer, did you sort out your leaky problem? I have just had the same problem with the hot water in coupling. Loads of PTFE but still leaking. Did you try the gas grade PTFE, jet blue or the loctite 55 on the joints and what was the outcome? Thanks.