Search results

its a showerforce turbo 2 so probably a cheapie not sure of rating. Sorry Tony dont understand your ref to taps!

Read through many posts on here but cannot find the answer. Getting really frustrated now and need help. Shower pump has always been in the attic since we moved here and fkow has varied from ok to poor. i am now remodelling the ensuite and find the pump is in the attic above the HWC and below...

Ply now about 8-12% depending where i stick the meter. Sorry about the incorrect name WYL

Pin meter seems if i just stick it in the wood reads about 2% if i drive in a couple of panel pins reding 10-11%.Confused anyone help. Thanks for your reply WUL

I have had some pre oiled oak solid floor deliverd 3 days ago. Moisture reading is 2% and in the subfloor (plyover boarding) 2-3%. do I still need to leave longer to acclimatise. readings have been constant over 3 days. From what I can gather readings of subfloor and oak need to be within 4%...

I really need a bit of help here. I am starting installing a solid oak floor shortly pretty much have a good grasp of the process. I will be secret nailing and leaving an expansion gap about 14mm. i intend to replace the skirting with 20mm wide oak skirting. question is can I nail through the...

Just a couple of questions about my upcoming tiling of the kitchen with ceramic tiles. I am overboarding with 12mm ply. Can plasterboard screws be used for this. Also do screws need to be countersunk or pushed just below the surface without contersinking. Thanks

Going to start on my en suite shortly. Dont want to go the whole wet room route as too costly/ difficult. I intend replacing the existing tray with a larger one and have a walk in shower in an alcove so 3 walls tiled and and open end to walk in (no door). Although there will be a reasonable...

Anyone any thoughts on this My house has an annex which my mother lives in and part of the annex is a conservatory which is used by her during the day but not at night. Currently there is a radiator in the con which is attached to the CH in our side of he house it heats up ok as the con is...

Thanks garymo. When I moved in here (18 months ago) the seller had just built an extension(he was a builder) and whilst extending the wiring had it all checked(1980s property). He supplied me with all the paperwork so I would assume ok although I have noted your comments on having the wiring...

Thanks for that Garymo. I did try running it on an extension into another socket (seperate circuit & mcb) still tripping. Does this mean it's likely not to be the fixed wiring? If there is a chance there is a problem with fixed would rather get it checked. Have checked the backs of all sockets...

Would really appreciate any help. Have had a problem with tripping RCD for months now. No electrical work done on the house. After checking on numerous occasions narrowed it down to Kitchen Sockets. Have today traced it to dishwasher. When dishwasher is on trips RCD when off no problem. couple...

Thanks for that. Yes looks as though I have done the logical tests and will get someone in. just as a matter of interest what should the spark do in terms of isolating the fault. Just so I have an idea what hes doing. thanks

I have a consumer unit with one RCD and 8 MCB. Have lived in the house about 3 years had had the occasiional nuisance trip. however this has now becoming much more frequent. symptoms are . 1. RCD trips but MCBs stay on. 2.. Need to turn off all MCB to rest RCD. Ihave narrowed it down to one...

Can anyone help? The pizzo quartz that lights the fridge was not sparking so I remeoved the fridge to have a look. Strange thing is if the PQ is removed from its metal holder it sparks fine. as soon as it is put back in it will not spark at all. Baffled. Could it be an earthing problem ? any...

Need some help is this TWP roof and if so is it walkable on to paint window. Previous owner left a plank up there so I assume this can be done. Are these roofs covered in a shell. Thanks