Search results

People, I have a Kinder Oasis Gas fire which requires a service. In addition, when the Gas Fire is off there is a nasty down draught from the Chimney. Can anyone please advise what could be fitted to the Chimney to prevent the down draught. Some pictures or a link to a photo would be...

People, I am considering purchasing a Wickes steel garage door which comes pre-framed. It is approximately 60% of the price charged by specalists such as Garadoor. Can anyone advise on the quality of Wickes Garage Doors? Cheers Need Help21

People Can anyone advice on a garage door supplier and fitter who operate in the Buckinghamshire area. I have tried the Garage Door Company and wish to get a second quotation. Cheers Need Help21

Hi all, Can anyone please recommend me a garage roofer. I need the roof re-felted in a quality felt. No timber replacement is required. There is around 15m2 of felting required. I live in Chalfont St Peter, Buckinghamshire. Many Thanks Need Help21

People, Can anyone recommend a company that specialises in the recovering of garage roofs in Buckinghamshire. My garage roof is leaking so I am looking to have the felt replaced. The roof measures around 14m2 so an indicative price for supply and fit in a quality felt would be...

People, Can anyone please recommend a guttering supplier in Buckinghamshire? I am looking for new soffits, facias and guttering Cheers Need Help21

People. I would greatly appreciate a link to a thread or guid on siliconing a bath. The bath is quite a large bath tub and sits in a corner. It fits up to ceramic wall tiles. I do not have the option to pull the bath from the wall (to squirt silicon down the back) so the silicon will...

People, I require a bathroom cabinet that meets the following:- 1. Has a mirrored front. 2. Is triangular so can be fitted in a corner. 3. The front width must be no greater than 400mm wide. 400mm wide would be ideal and not the norm of 450mm or 300mm. 4. Measures around 1000mm...

Hi. We are just about to have some bathroom wall and floor tiles fitted. The floor tiles are square and grey in colour, we intend having a dark grout. The wall tiles are also square and are white in colour, we will be having a white grout. The floor tiles around aroun 1-2mm smaller in...

People, I have a Pressurised shower running at about 3 bar with a flow rate of arround 13 litres per minute. When using the shower (which is above a p shaped bath) the shower slowly fills. It begins to fill after around 20 seconds and continues to fill throughout the shower. It then...

People, Can anyone advise on a company that manufacture a quality click clack bathroom basin waste unit. I have recently purchased one which has turned out to be pretty naff. I need one that is suitable for use with a basin that has an overflow. Cheers Need Help21

People, Can anyone advise on where I can purchase 40 x Caeser Ceramics Cirrus Negro floor tile. They are a grey porcelain floor tile which are around 33cm x 33cm. I am ideally looking to get hold of them at a cheap price (isn't everyone). I am based in Buckinghamshire but could drive up...

People Can anyone advise on a retailer that supplys tiles from a Company called 'Craft Ceramics' at a reasonable price???? http://www.craftceramics.com/manufacturing.php Cheers Need Help

People. Can anyone advise where I can source a 22mm flexible full bore hose. Ideally I would like to be able to connect each end to a 22mm compression fitting. I would like the bore of the flexible hose to be as large as possible Cheers Need Help

Dear all, Up until around a month ago I had a bathroom wash basin with 32mm waste pipe travelling vertically down the wall into a swept T. The swept T connected into a 40mm horizontal pipe run which ran for about 1m into an an original fitment stack pipe. The stack pipe and horizontal pipe...

People, It would be greatly appreciated if someone could confirm if the following electrical alterations to my residential dwelling are notifiable or not:- 1 Fitment of an inline fan in the loft to extract air from the bathroom. The fan itself will be mounted on a board in the loft (and...

People, I am notifying the council in advance of wiring changes, part of which includes the bathroom. I am fitting an "inline" extractor fan in the loft that is fitted with a timer overrun. This will therefore require a pemanent live as well as the switched live. The switched fan live...

People, I would greatly appreciate some assistance with the following. I have a cold water storage tank in the loft. I am installing a new bathroom below and intend installing a monoblock mixer tap. My local pumbers merchants have advised against going for a european tap manufacturer...

People, I am installing a basin with overflow in the bathroom with a mixer tap and click-clack waste. Can someone please advise when I should use a slotted and when I should use an unslotted click-clack waste. Cheers

People, After careful thought and consideration I am going to install an "inline fan" in my loft which will remove air from my bathroom and vent it through the fan and out through an external grille. Can anyone advise on where I can purchase a fan grille for the fitment into the bathroom...