Search results

Sorry agile you just rattled me last night (and i was on the phone whilst composing my post to you) you can see from my previous post its red green yellow gold and as regard testing i took the board off and went through all the resistors and diodes after following the power supply through the hw...

try searching for ap or ap autella, lucas girling or lsuk one of these should be able to provide you with a repair kit. regards

Thanks for your help the other numbers on the pcb read as follows CE PIN 0085BL0059 0118 565495.1 4150 00542 BARCODE|||||||||||| ETC 0580001-0700542G With regards the resistor the last time I checked first colour green=2 second colour red =5 third colour yellow multiplier=10000...

Hi, For your information, Firstly it is impossible to diagnose your engine fault accurately by post, but you should know that 1.7 tdi vauxhall engines are designed in such a way that the rockers should (I say SHOULD) snap to minimise damage to valves, the majority of their petrol engines...

Hi Thanks again for your reply but I'm positive I have read the resistor correctly being being red green yellow with a gold tolerance, the exact same resistor is used at r57, however if i follow the circuit back it leads to pin two on the block connector from the timer (that would be the feed...

Hi, thanks for getting back to me so soon, the board has three pots p1, p2, and p3, I also assume the sticker and barcode are the part no, which is 0.580.001(07)

Hi its cold up here in Scotland so your help would be gratefully appreciated. My baxi 105e developed a problem on christmas day with a ch failure although the hw is fine, had been having an intermittent fault with timer so suspected that first, no apparent fault ? (but shall be replaced) As...