Search results

DIYedboy did this solve the problem. Sorry for such a late reply. I will have to replace the window boards. Will have to look at that though as they are plastic and not sure how they are fitted

I think it is brick as it is a single skin wall. I say this because I had a look when the windows was fitted.

Hi guys, I have a 1930's house which has to curved bay windows to the front. Both of which are double glazed. The external wall has been pebble dashed. And painted over with exterior paint. I am thinking of removing the pebble dash from the wall and replacing it with batten and tiles. The...

so are we now saying that if a door is to be secured and is designated as a fire exit and is also used as a entrance that it has to be a form of panic device? so a mag lock would not be suitable, depending on the inspecter. Would then a von Durpin panic device then be suitable, if this is...

you can have a push button to exit as long as you have a green break glass on the inside of the door near the push button in case of fire. You have not said if you have a PSU to power the mag lock. the intercom system will not be powerful enough to keep it energised all the time, so it will...

I used fernox brought in b&q in a mastic injector

the cleaner has been in since sunday. it does say it can stay in for a week and that is what we are going for. we have not removed any water as of yet.

i did shut down thae hot rads and let the old ones run for about 6 hours. but did not do tham one at a time.

can any one throw some light on how to solve my problem. i have recently changed some rads downstairs and one in the bathroom, during decorating. i drained the system and then top it up and bleed of the radiators. Ran the heating an everything seemed to get hot. However after a couple of weeks...

You need to run a 4 Core cable check your instructions with the fan. You should also have a Fan isoalting switch out side the bathroom

I dont think you will find another electricain would sign off some one eleses work. If they do they will, there is gong to be a big charge. Your friend should notify building control espcially the so called electrian other wise there colud be big fines

Thanks i was going to run it 15mm copper so would it better to sleeve it in plastic or copper

I am currently fitting a new bathroom in my house and i have got to fit a Mixer Shower. I know i have to put the pipes in the wall but do i have to protect them in a sleeving before plastering over them.