dishwasher

  1. 1

    Smeg integrated dishwasher

    Hi, I have the above dishwasher. Not sure of the model number but it is around 9 years old. (buttons on top of door when you open it) Anyhow, when i turn the power on it is making a constant noise, like its trying to fill up but nothing is happening. Around every 45-60 seconds it beeps 5 short...
  2. Pico

    Lagan dishwasher no hot water

    I have a problem with my dishwasher running on to the end but no hot water/steam. Lagan from IKEA Mine is 911539147 04 Type GHE624DA2 SER NO 70885276 21552 602.993.80 this was replaced by IKEA as last machine stopped and wouldn't empty. There's no warranty on this one. I'm happy to have a go but...
  3. R

    candy cdcf 6 error

    Hello everyone. I have a problem with the dishwasher candy cdcf 6. When I turn on the dishwasher, LED keeps blinking in the glass state. I also hear a beep every 30 seconds. Maybe someone has faced with this problem? Thanks for any reply.
  4. P

    Bosch Exxcel dishwasher Srs45e32gb water check light

    Hi, I have an ancient Bosch Exxcel dishwasher Srs45e32gb that has been working fine. I have put Finish dishwasher cleaner through it (something previous owners probably never did). The check water light is now coming on midway through a cycle. By jiggling the machine about it gets it going...
  5. S

    Indesit DIF04 dishwasher: no water circulation

    Hi -I've had this machine for well over six years, and the only issues have been heater replacements, which I've found relatively easy to fix myself. (I know - maybe I've been exceptionally lucky) Now, however, there's no water circulating. On start, I can hear the water entering the machine...
  6. M

    AEG Dishwhasher i40 + leak?

    My AEG dishwasher an f55002vi0p keeps coming up with a pressure sensor i40 fault casuing the drain pump to run all the time. I've taken the bottom of the unit and there was some water/yellow goo in the tray, it hadn't activated the polystyrene switch as I could push that up to check it was...
  7. meastwood

    Dishwasher underneath boiler

    Hi there, We've got a fairly small kitchen and both gaps in the worktop are taken up by fridge and washing machine. We have space in the cupboard underneath our boiler. So the question is: Can we place a dishwasher underneath a boiler without incurring any risks? Does it matter that the...
  8. motionunit

    Dishwasher turns off after pre-wash

    Wondering if anyone can help pinpoint what is wrong with our Howdens Diplomat integrated dishwasher. About month ago it started turning itself off after 10 mins. I thought it might be some kind of blockage so I've tried opening the front and clearing the visible pipes. I've also poured in a...
  9. Q

    Siemens dishwasher squeals loudly but works fine otherwise

    My Siemens dishwasher, about nine years old, makes a really loud squealing noise for 10-20 minutes at a time while it's in the middle of its programme. Think banshee with a stubbed toe, about 2kHz, and loud enough to be heard throughout the house. It doesn't do that when filling or emptying...
  10. S

    Candy Dishwasher 2515 stuck on P1

    So I have this dishwasher (actually I have 4 of them) that is stuck on P1 and keeps flashing and beeping... it runs, it stops sometimes it runs for 2 minutes sometimes it runs all night long. If I try to change the program it immediately gos back to P1. I am a mechanical engineer so I pulled it...
  11. ian redshaw

    miele g1022 dish washer fill drain light on

    hi my miele g1022 dishwasher has the fill drain light flashing but not constant this has happened intermittent for about a year now all it does is start up the drain pump then goes to the light on and stops any ideas, i have checked filter for drain and clean out the none return valve in the...
  12. A

    Siemens dishwasher leaking. Not the usual suspects.

    Hi All, I have an integrated Siemens dishwasher which has been displaying the e15 fault and she enough the bar of the machine is filling up with water. Having had a good furtle round the leak is coming from the join between the plastic internal base and the metal sides. Any ideas whether this...
  13. P

    Integrated Kenwood dishwasher tripping problem

    Hi everyone, I am having a problem with dishwasher. It keeps tripping out, without starting or making noises/bangs etc. Here is a video showing my problem. Anyone know what is causing it?
  14. C

    Bosch dishwasher heating problem

    My Bosch Classixx Slimline dishwasher (SPS40C12GB about 4 years old) has three heat settings for washing... 70 degrees Intensive, which works fine 45 degrees Quick, which also works fine... But The ECO 50 degrees washes as normal, but does not heat the water. Everything else in this wash is as...
  15. N

    Running 3m kitchen waste - what diameter

    Hi - I am installing new kitchen and changing position of sink. Access to soil pipe is 3m from sink and will run behind units with one 90 degree bend. At end of run just before soil path the waste will pick up washing machine and dishwasher waste. Would 40mm pipe be sufficient with...
  16. C

    Smeg Dishwasher E1 Error After Power Cut

    Hi folks My Smeg DI6012 dishwasher is throwing up an E1 error code after a recent power cut. There is no water inside the base (bone dry) and I have tried to reset by doing the "switch on, press program button 4 times etc" routine. But the reset procedure doesn't appear to work. Does anyone...
  17. A

    Smeag Dishwasher - E1 'anti-flood' lower front panel removal

    Hello all experts, apologies for me (Mrs DIY cannot!) for asking this old question, but I can't seem to figure out how to remove the lower panel. Kick panel is removed and now the base of the dishwasher is visible, but for the life of me I can't see how to get the plastic panel off. Laying on...
  18. M

    Candy cdi 1020 Dishwasher not working

    Last night I loaded the dishwasher as usual and selected the programme (p4), and then it started beeping and the lights for programme 1 and 2 were flashing. So I then tried again I turned the dishwasher off and then back on and set it to p4 and it did the same so I then turned it off again and...
  19. SadieLynne

    Plumbing in a dishwasher, HELP!

    I'm trying, and failing, to install a tabletop dishwasher. I know I need a 'washing machine' valve, which I have, but, what now?! Do I Need to cut the pipe? It seems to be capped. Any advice is appreciated! IMG-20170327-WA0001 by SadieLynne posted 27 Mar 2017 at 10:03 PM
  20. C

    Zanussi ZDF14001WA dishwasher stuck on 2hr Programme

    Hi, I have a Zanussi ZDF14001WA dishwasher that is stuck on the 2hr programme which starts as soon as the dishwasher is closed - this usually requires the start button to be pressed. Switching between programmes on the dial doesn't seem to do anything. Just wondering if there are any button...
Back
Top