imperial

  1. A

    Metric, imperial,

    Got an old stone house, other than getting a micrometer what clues give away metric or Imperial pipe. The copper looks really clean but it's been under the floor so that might mean nothing. House is like an onion, I really need to stop peeling, pulled a load of lead pipe or so at least I'll get...
  2. N

    K Type copper? (duplicate thread, please see "plumbing and heating")

    Started a job today in a very old house and have come across what looks to be K type copper. The inner wall of the copper is extremely thick and nothing will take to it other than a transitional coupling which I cant use because it is on the hot and it cannot be guaranteed that it would hold. I...
  3. N

    K Type Copper?

    Started a job today in a very old house and have come across what looks to be K type copper. The inner wall of the copper is extremely thick and nothing will take to it other than a transitional coupling which I cant use because it is on the hot and it cannot be guaranteed that it would hold. I...
  4. S

    Seeking chrome angled towel radiator valve - Imperial 1"

    Hello, I am desperately trying to save an original chrome towel radiator that is nearly 60 years old and been in our family for almost that long. I am looking for an angled radiator valve - 1” male fitting into the radiator and 0.75” (but 0.5” would do) female connection into the pipes. Or an...
  5. BillyWillySilly

    Leaky Imperial Radiator Valves

    Hi there, I live in a mid-80’s house full of lovely imperial radiators. I noticed wet carpet in one of the rooms and found there to be a leaky radiator valve. Long story short I managed to isolate both the shut off valve and the lock shield. However, when shutting off the lock shield there was a...
  6. Fonzyrelli

    Weeping compression nut on gate valve & Shower Valve

    Hi everyone I'm currently doing up my bathroom and I need some help please. :( Gate valve. I've currently replaced gate valves on the cold and hot pipes coming into the bathroom so this can isolated whilst the rest of u the house has water but the problem is the cold pipe gate valve is...
  7. J

    Replace Imperial radiator with shorter metric - what fitting?

    How do I connect a 15mm pipe to a 1" diameter male "O" ring type fitting? See photo. I am replacing an Imperial radiator in a single pipe system with a metric one which is quite a bit shorter. I have bought a 1/2" Danfoss Randall RA-G Single Pipe TRV Body which comes with a chrome fitting...
  8. P

    Replacing an old imperial radiator that is corroded and leaks

    Hello, I have a radiator in my sons bedroom that is old and has actually started to leak through the bottom, which has a small section that is rusted through. I presume it's imperial radiator, since when I measure it, it doesn't seem to be of any standard size. If you check the 'radiator'...
Back
Top