z-wave

  1. eveares

    Oh Dear, Z-Wave fibaro module requires box depth not less than 60mm!

    Below is my latest edition to my Automated world, a Fibaro FGS-223 module what controls the upstairs hallway light and the light in the spare room next door to the switch. Cables are: feed in, light 1, light 2, 2-way switch downstairs, and switch in adjacent room. Bit tight in there... 2 by...
    • eveares
    • Thread
    • automation back box dangerous electrics fibaro light switch tight fit z wave z-wave
    • Replies: 4
    • Forum: Electrics UK
  2. eveares

    RGB Strip Light with Fibaro RGB Controller Project

    I Installed 1.4 Meters worth of RGB LED strip light at the back of my desk a couple of months ago as I had some spare from the main qtx RGB strip light in my kitchen that I installed a few years ago. With my recent move to sell my outdated X10 Automation and to slowly invest in the Z-Wave and...
    • eveares
    • Thread
    • automation electronics fibaro led lighting project rgb samsung smartthings z-wave
    • Replies: 1
    • Forum: Home Automation
  3. eveares

    Z-Wave FGS-222 relay module - Popped and Tripped the MCB - Still works :/

    So replaced the two old ugly X10 appliance light switches in my bedroom and installed a new Fibaro FGS-222 Z-Wave enabled relay module inside a 47mm dry-line back box along with a standard double switch for local control. Pain in the *** to get it all in the back box and get the switch screwed...
    • eveares
    • Thread
    • automation bang fault fgs 222 fgs-222 pop trips x10 z-wave
    • Replies: 8
    • Forum: Electrics UK
Back
Top