Hi, My parents are having a problem with an additional RAD on their system. All other Rads are fine, this one get fairly hot at the top, cool at the bottom.
Rest of system is on 15mm copper, this one is micro-bore! Also looks like feed is ok, but return goes into the return from another Rad, not into the main return.
Is there anything which can be done and would either of these inconsistences cause the problem?
Rest of system is on 15mm copper, this one is micro-bore! Also looks like feed is ok, but return goes into the return from another Rad, not into the main return.
Is there anything which can be done and would either of these inconsistences cause the problem?