I would like to install 5 x 12V Halogen lights using a DAIS DA-105 transformer. Each light is 20W. The Transformer states the MAX is 105W/VA. The instructions are not very good, so want some advice.
1. Can the transformer take this load ( 100W )
2. The transformer has 3 outputs for lights and i want to fit 5
3. Can i take one single output from the light to a single Joint Box and connect the 5 lights up at this point. The distance between each light and transformer will be within the maximum stated in the instructions.
4. Everything will be fitted as per the present wiring regulations. I do not intend the lights to be dimmed. Thanks for any concern in advance.
5. I do not like LED lighting and I prefer to use the transformer option in this case.
1. Can the transformer take this load ( 100W )
2. The transformer has 3 outputs for lights and i want to fit 5
3. Can i take one single output from the light to a single Joint Box and connect the 5 lights up at this point. The distance between each light and transformer will be within the maximum stated in the instructions.
4. Everything will be fitted as per the present wiring regulations. I do not intend the lights to be dimmed. Thanks for any concern in advance.
5. I do not like LED lighting and I prefer to use the transformer option in this case.