Hi
Need to replace the cable that runs from the timer unit to the the immersion heater (3kw). You'd normally use the butyl stuff, but would a piece of 2.5mm t&e be ok (as s I have lots spare!)
Distance is approx 50cm.
3kw immersion.
Timer runs to isolator switch, which runs to cu on 2.5mm and a 16amp MCB.
Also, while we're here... currently have a double socket coming off the isolator switch as a spur. Can I add another double socket next to this and spur off this spur? All are next to each other, in airing cupboard in bathroom.
Thanks,
Need to replace the cable that runs from the timer unit to the the immersion heater (3kw). You'd normally use the butyl stuff, but would a piece of 2.5mm t&e be ok (as s I have lots spare!)
Distance is approx 50cm.
3kw immersion.
Timer runs to isolator switch, which runs to cu on 2.5mm and a 16amp MCB.
Also, while we're here... currently have a double socket coming off the isolator switch as a spur. Can I add another double socket next to this and spur off this spur? All are next to each other, in airing cupboard in bathroom.
Thanks,
Last edited: