My electrician has stood me up so am left with this and I unfortunately can't work it out, so any help much appreciated.
There was a 1 gang 2 way switch for the kitchen lights, we are adding 2 additional circuit for spots and a feed for outdoor lighting so have a 3 gang switch to go in.
The 2 core cables far left and right are for the 2 new circuits. The 2 x 3core cables are seemingly from the existing kitchen light and are live. There was only one 3 way cable previously but am assuming the 2nd 3way is to power the additional 2 lighting circuits!?
The 2 x 3way cables have been written on, the one on the left states "kit 2 way" the other "L BL W G S/L KIT". They have been connected as you can see on the photo.
Any help on how to wire this to the switch much appreciated.
Thanks in advance
There was a 1 gang 2 way switch for the kitchen lights, we are adding 2 additional circuit for spots and a feed for outdoor lighting so have a 3 gang switch to go in.
The 2 core cables far left and right are for the 2 new circuits. The 2 x 3core cables are seemingly from the existing kitchen light and are live. There was only one 3 way cable previously but am assuming the 2nd 3way is to power the additional 2 lighting circuits!?
The 2 x 3way cables have been written on, the one on the left states "kit 2 way" the other "L BL W G S/L KIT". They have been connected as you can see on the photo.
Any help on how to wire this to the switch much appreciated.
Thanks in advance