Hi folks,
Got a bit of a strange one here, I have a plastic waste pipe coming through the wall from the washer and I want to replace the 90 degree bend and lengthen the pipe that runs into the drain (it's been cut about 3" above the drain hole and also has no bracket securing it to the wall).
I thought this would be a simple job but I can't for the life of me find a straight forward plastic bend, pipe or bracket in 54mm! The size just doesn't seem to exist.
I thought it might be in inches so I converted it and it comes out at 2.13", so that's no use either.
Probably me being thick but I'm baffled
Got a bit of a strange one here, I have a plastic waste pipe coming through the wall from the washer and I want to replace the 90 degree bend and lengthen the pipe that runs into the drain (it's been cut about 3" above the drain hole and also has no bracket securing it to the wall).
I thought this would be a simple job but I can't for the life of me find a straight forward plastic bend, pipe or bracket in 54mm! The size just doesn't seem to exist.
I thought it might be in inches so I converted it and it comes out at 2.13", so that's no use either.
Probably me being thick but I'm baffled