- Joined
- 4 Jul 2005
- Messages
- 7
- Reaction score
- 0
- Country
i have just bought again b and q (greenwoods) extractor fan.
it has three terminals L1, N, L.
iam connecting the L to the live feed and N to neutral.
when i turn on the power the fan runs for a few seconds then cuts out. it will not run again when it is switched on or off then back on again. however when left for several hours off then turned on again it runs for a few seconds again then cuts out.
i have replaced the fan with a new one from bandq and im still getting the same result.
to test the fan i wired a plug up on a piece of wire with the L to live on the plug and the other wire to n. the fan cut out again after several seconds.
what is going on? is it something simple iam doing wrong?
it has three terminals L1, N, L.
iam connecting the L to the live feed and N to neutral.
when i turn on the power the fan runs for a few seconds then cuts out. it will not run again when it is switched on or off then back on again. however when left for several hours off then turned on again it runs for a few seconds again then cuts out.
i have replaced the fan with a new one from bandq and im still getting the same result.
to test the fan i wired a plug up on a piece of wire with the L to live on the plug and the other wire to n. the fan cut out again after several seconds.
what is going on? is it something simple iam doing wrong?