- Joined
- 16 Jul 2004
- Messages
- 27
- Reaction score
- 0
- Country
hello
can you help please just bought the honeywell accenta ade gen 4 alarm
i have a few questions if you can help please
1. can i install a pir in a bathroom if so does it need to be a speciall pir ?
2.can`t remember how to install 2 door contacts in the in the pcb board into zone 1
why i ask is i have left my old pir on the walls and my front and back doors contacts which i have had for some 8 years all working fine
but i have 4 wires in back door contact and 3 wires in front door contact
in the booklet i have with the new alarm it only shows 2 wires into a door contact ( no tamper wires )
3. can i leave not connecting the tamper system to the pcb board
as it is now new the tamper is in a closed circit with a pin in the tamper zone will the system work ok without connecting tamper to the alarm
thank you all for reading sorry for going on a bit
thank you paul
can you help please just bought the honeywell accenta ade gen 4 alarm
i have a few questions if you can help please
1. can i install a pir in a bathroom if so does it need to be a speciall pir ?
2.can`t remember how to install 2 door contacts in the in the pcb board into zone 1
why i ask is i have left my old pir on the walls and my front and back doors contacts which i have had for some 8 years all working fine
but i have 4 wires in back door contact and 3 wires in front door contact
in the booklet i have with the new alarm it only shows 2 wires into a door contact ( no tamper wires )
3. can i leave not connecting the tamper system to the pcb board
as it is now new the tamper is in a closed circit with a pin in the tamper zone will the system work ok without connecting tamper to the alarm
thank you all for reading sorry for going on a bit
thank you paul